versacamm seems like its printing crop marks...but nothing is there.

[KARYN BUSH]

hey all!

so yeah this is a new for one me. i'm printing away tonite and these particular files have to have crop marks...for cutting after laminating.
it goes thru the motions...the faster printing for the marks...but no ink comes out...the graphics print fine...wtf? has anyone had this happen before?

 

[Mainframe]

I would re rip the file & try to print it again-if that doesn't work I don't have a clue

 

[TresL]

and power cycle everything, then check your Blk ink.

 

[Sign Works]

Think I'd be checking the blk ink first off.

 

[chopper]

I would also check the color of the marks to make sure that they are printing in black, not white..
//chopper

 

[KARYN BUSH]

its all fixed....clogged and running low on black. the machine always beeps me when the ink is low so i don't know why it didn't. i didn't think too much of the ink running low because all the graphics were printing...but now that i look at them in daylight, i can see there was a black issue.
thanks folks!