versaworks not cutting

[Hog Wild graphics]

I am having problems with versaworks after update. When I import in a file with contour cut normally it shows up in red and will cut after printing. But when I import it today it is grey and only prints. I tried old files that I know have cut before and still getting gre cut lines and no cut.

It has to be something in settings but I can not find it.

 

[GTSTech_1]

In VersaWorks, confirm you have Convert spot colors selected and an EPS margin (.05)......4 tab in Que Properties. Once confirmed, make sure you have the CutContour color selected on the design side. If you don't see "marching ants" in VersaWorks, the file will not cut.


My .02

GTSTech_1

 

[Hog Wild graphics]

All that is correct. I have a file I printed just the other day with contour cut andit does not show cut lines. Its like versaworks isn't reading the cutlines. Call a tech at GSG and they said it has to be my file I said I can print cut that same file from another computer just with versaworks just not my main computer. Some setting must have changed when I updated.

 

[CS-SignSupply]

Is the Cut Controls Tab set to PRINT ONLY?

 

[duggan]

having same problem!

I'm having the same problem! Its like versaworks isn't reading my cut marks.
> I've made sure that the correct color is being used in Illustrator
>Checked the settings in Versaworks - Que A properties and made sure it wasn't set to print only.

Still having the problem!
Any other ideas?

 

[duggan]

Got it to work!

In Illustrator, I moved the layer with the cut contour to the side, and then rasterized the other layers. I then placed the later over the top of the rasterized layers. Saved. Imported into Versaworks, and it worked!