Versaworks Question

[CENTERVILLE SIGNS]

=Why won't versaworks let me add another set of these decals without goint to another row? there is plenty of room. I am wasting vinyl ... THANKS

 

[Gino]

What is your media roll width set to ??

 

[CanuckSigns]

it doesn't look like you have enough space left, if you rework the file to condense the fish closer to each other you should have no issues.

 

[Gino]

Is this a 30" or 54" ??

 

[CanuckSigns]

Is this a 30" or 54" ??

30" according to the screenshot

 

[Gino]

Oh, yeah..... stoopid me was trying to read the numbers. I didn't bother looking at the intervals along the top.

On a 30" do they go 10 - 20 - 30 ?? If so, just squish them in like he said and open up to a complete 28.2". Yours looks like 27.79. You'll hafta play with your pinch rollers a little more to get it to fit as is.

Ours is a 54" and we usually have them set to around 52.8". Can go pretty far like that.

 

[asd]

it doesn't fit because you printer its only reading 27.79" of media and the size of your file is 6.98
if you multiply 6.98 x 4 you need at least 27.92"

 

[ams]

Move the pinch rollers a little further apart and you won't have a problem.

 

[djinnerman]

A part of me feels that the artwork can be ganged up even closer than what they are now and save a lot of space and substrate. Other part of me is checking the pinch rollers for maximum coverage.

Then again, you might have them just as prints and not cut contour.