-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
Vinyl print ghosting / lines
- Thread starter jeffkics
- Start date
Jester1167
Premium Subscriber
This time of year static would be a good bet.
Jester1167
Premium Subscriber
Raise the humidity in your shop and see if it helps. Before you go out and buy a humidifier, grab a spray bottle and fill it with water and spray the bottle around the shop floors then try printing again.
On a side note, it will keep you from getting shocked all winter, especially on the laminator.
On a side note, it will keep you from getting shocked all winter, especially on the laminator.
If it was static, wouldn't all the rolls do it? my 1105 prints this exact file perfectly if I swap it out and print minutes apart
Jester1167
Premium Subscriber
It may not be static, but for us banner material was the worst, and a plastic liner tends to build static at a higher rate than other media.
You've also narrowed your problem as a media-specific problem by saying "my 1105 prints this exact file perfectly".
You've also narrowed your problem as a media-specific problem by saying "my 1105 prints this exact file perfectly".