beaulaland
beaulaland
Anyone repaired their vinyl that was peeling up with a stretchable clear laminate ? I have been having problems with trailers with rivets
Thanks in advance ! Fay
Thanks in advance ! Fay
-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
vinyl repairs with laminate
- Thread starter beaulaland
- Start date
Boudica
I'm here for Educational Purposes
What type of vinyl did you use,? There's a technique to wrapping around rivets. Based on the limited info... Either bad installation, or it was a calendared vinyl, which will pull up. To answer your question about using laminate to fix that issue... Never heard of that. Not sure how it would help.
beaulaland
beaulaland
ARLON 4500
beaulaland
beaulaland
ARLON 4500
Boudica
I'm here for Educational Purposes
That's the laminate, a calendared laminate. Even if you used a cast vinyl... That calendared lam will pull up.
Edit, for some reason my eyes read 3420. Still, a calendared. Which might be the problem.
Last edited:
Notarealsignguy
Arial - it's almost helvetica
Oh boy
GAC05
Quit buggin' me
That is very gender-specific of you guy.
Notarealsignguy
Arial - it's almost helvetica
Oh boys girls and others didn't have the same ring to it
mcclaysign
Manager
Wow! Seriously! There is song called, Oh Boy, should we cancel them? Haha, Oh Boy is also just an expression. It has no intention of being gender-specific!!!!!!
English[edit]
Alternative forms[edit]
- oboy (rare)
Interjection[edit]
oh boy- An expression of delight or joy.Oh, boy! I can't wait to tell my friends about this!
- An expression of dismay, resignation, frustration, or annoyance (sarcastic).Oh, boy. This is going to be a lot of work.Oh, boy. Now what do I do?
MikePro
New Member
pics or it never happened. ....but i can imagine what a trailer wrapped in calendared media over rivots looks like!
cheap wraps are cheap wraps, but you gotta know your limitations: that stuff should be on flat surfaces only.
If you intend to be stretching/forming over rivots & bridging over panel seams, then you should be picking a material designed for this purpose or simply using the cheapest media possible and designing/applying/cutting-out around these points of failure.
cheap wraps are cheap wraps, but you gotta know your limitations: that stuff should be on flat surfaces only.
If you intend to be stretching/forming over rivots & bridging over panel seams, then you should be picking a material designed for this purpose or simply using the cheapest media possible and designing/applying/cutting-out around these points of failure.