Vinyl suggestion for truck&trailer wrap job

[Mark M. EVCIL]

Working on the project that contains multiple different sizes truck&trailer wrap like 26 footer trucks, 30ft,40ft and 53 ft trailer wrap. Surface is flat with some rivets. Any vinyl&lamination suggestion for the job ?
which one should I go 3M IJ180cv3,avery etc ??

 

[Reveal1]

You'll get suggestions for all of the above and then some. We like the new Arlon SLX2 and use that on a local fleet. Wraps well hot or cold and weeds nice if you need to do any print/cut. Great value $$ too.

 

[Mark M. EVCIL]

Thanks for the reply. I'll consider that suggestions.

 

[Jester1167]

Avery 1105 and matching lam is always my first choice. No experience with the new Arlon.

 

[rjssigns]

I like Arlon products too. YMMV

Maybe useful, maybe not: Installer friend wraps trailers of all kinds. Wraps are sent to him printed on 3M with liquid lam. Said they get at least two years out of them.(road salt, temp extremes etc..) By then the marketing campaign changes and it's time to rewrap.

 

[BigfishDM]

If your going to try or consider SLX then might as well throw mine in there also. SLX+ was made after my material hit the market and installers will love it! Kits are only $700 for 54"x150' kits on your first order, then they are $750 and its a 10 year outdoor rated 2 Mil Cast wit Air-Flow Liner.