-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
Question Vp540
- Thread starter zigns62
- Start date
WrapYourCar
New Member
Depends if you have a USB port on the laptop.
Yes, on the laptop, Just got a USB to cat 5 adapter. Not sure how to connect to read VW from my printer?
Roland Product Support
New Member
Hey zigns62,
You have to get your Ethernet network setup and working before introducing the printer into the mix. So, if you need help getting your USB-Ethernet adapter working, considering contacting the adapter's tech support department for assistance. Specifically, you want them to setup a "Static IP Address" for the adapter. We recommend the IP address of 192.168.005.100, Subnet mask set to 255.255.255.000 and the Gateway fields left blank.
Once they have the adapter setup for you, you can connect the printer directly to the adapter (using one Ethernet cable only), manually set the printer's IP to 192.168.005.225, Subnet mask to 255.255.255.000 and the Gateway set to all zeros.
Once this is all setup, you should be able to communicate with the printer.
If you have additional questions or need extra support directly from Roland corporate support, please submit an "official" support request form online here: Product Support Form | Roland
If you do write us, we look forward to helping you and take care,
Roland Technical Support
Roland DGA Corp.
rn
You have to get your Ethernet network setup and working before introducing the printer into the mix. So, if you need help getting your USB-Ethernet adapter working, considering contacting the adapter's tech support department for assistance. Specifically, you want them to setup a "Static IP Address" for the adapter. We recommend the IP address of 192.168.005.100, Subnet mask set to 255.255.255.000 and the Gateway fields left blank.
Once they have the adapter setup for you, you can connect the printer directly to the adapter (using one Ethernet cable only), manually set the printer's IP to 192.168.005.225, Subnet mask to 255.255.255.000 and the Gateway set to all zeros.
Once this is all setup, you should be able to communicate with the printer.
If you have additional questions or need extra support directly from Roland corporate support, please submit an "official" support request form online here: Product Support Form | Roland
If you do write us, we look forward to helping you and take care,
Roland Technical Support
Roland DGA Corp.
rn