Y-Axis Confirmation

[Atomic DNA]

I've reviewed my manual and still can't find anything on reviewing the cutting width of the material. Once the media "spools", for about a second it will show the X and Y axes and then goes to another screen. I would like to recall the width of the material without having to disengage the pinch rollers and resetting just to get the width. It's probably something simple.

On my old 7000 series, I could just push a button and it would recall the info.

 

[Jim Doggett]

I've reviewed my manual and still can't find anything on reviewing the cutting width of the material. Once the media "spools", for about a second it will show the X and Y axes and then goes to another screen. I would like to recall the width of the material without having to disengage the pinch rollers and resetting just to get the width. It's probably something simple.

On my old 7000 series, I could just push a button and it would recall the info.

Your cutting software should poll the width when then cut/output dialogue box pops up ... either automatically, or when you click a button. In that way, the software can maximize material usage when paneling, and also warn you that the cut job will be segmented.

 

[Atomic DNA]

Jim,

I'm using Cutting Master and this is my window. It does not give me the size.

 

[StarSign]

Press the ? next to media size

 

[Atomic DNA]

Press the ? next to media size

I'm an idiot. That did the trick. Thank you!