I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
Hi Guys really need some help on my Roland XC-540 it has been offline for around 2 months now.
The CYAN & Magenta is not firing at all I changed the fuse and it has blown almost instantly when I put it in and turned it on. Luckily I have a spare fuse however thinking there is no point putting...
Hi sorry for the late reply I changed the cables around are these the flex cables ones? that are going into the motherboard as I changed these and nothing happened or are you on about the ribbon cables by the print head?
i.e the picture attached
Hi Guys,
Had an old thread however not had much luck with it.
I have a xc-540 and I have no magenta or cyan what so ever I believed this to be a issue with the fuse as someone said I could have blown the fuse when I was trying to fix my 'sensor eye error'
I have since ordered 3 fuses and...
Right fixed this issue for anyone having this issue I did the following:
Behind the cut carriage is a sensor I removed the sensor and cleaned it with alcohol and put it back in worked fine. Struggled to find the sensor at first!
Ahh! Mine was touched i.e the cables etc so I tested the fuse today Im suspecting a fuse issue ordered some new fuses due to be with me tomorrow so ill update you on that tomorrow when it arrives. Have you tried doing an ink renewal and a powerful clean? I know they say not too however I often...
Thanks for the reply I will be ok with doing it myself as Ive seen where they go on the machine! is this the correct part from a uk supplier so I can get it quicker think I might have found it on there site not sure if its correct...
Hi Guys I have been having endless issues with my xc-540 this week firstly I kept getting sheet set error finally after a few days changing different things I changed the sensor and it worked fine however my issue is now I am not getting and Magenta or Cyan after multiple cleans etc nothing...
Hi this morning my machine randomly showed sheet set error pinch rollers in correct places had this machine a long time so tried the following;
Tried loading just a sheet with edge detection etc a piece of vinyl in too..
Cleaned encorder strip,
Made sure the cables are in properly.
Prior to...
Hi have a huge issue this morning suspecting need a new encorder is this correct?
See attached images.
See images the prints jumping a lot tried it with various media still same issue.
Thanks
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.