Recent content by infinitesign

I use Corel Draw with CoCut. Flawless software. You can get versions of Corel Draw that are 2-3 years old for 75.00 online. With a real serial number. CoCut will run about 550.00 though. I do not know any way around that.

;)

May I privately email you about cnc plans, and how they interface with your software?

I will try the 45 degree. I was taught to lay it almost flat back onto itself when removing the paper. It is worse in humid weather. Thank You.

If there are any users of Oracal 651 and Gerber HP, I have a question. When using HP vinyl, I have good luck with thevinyl sticking to the application tape rather than staying on the paper when peeling. With the Oracal 651, it is a bugger. It seems to want to stay on the paper. I do use a high...

Has anybody used base clear automotive on vinyl to airbrush a vehicle graphic?

What are you using for a substrate when you have to do a free standing install?

Has anyone used paint and primer in one to seal the edges of your cut luster board, and does it hold up?

Hey, I know you.

From the sound, they are parking sign Post (the pounding in gave it away). I always have to just take the pick pole and chop out all the frozen dirt around them. Usually only 6" down, and it takes a minute, then its loose dirt after that. Post hole directly next to it for install. Ouch.

Yes........it was -30 with the wind chill today in Augusta, ME. Thankfully, I did not have to dig any holes today.

You are right there.

You can get about 25.00 each for a double sided corroplast yard sign here. Luckily some of my customers have not noticed that you can buy them on line for one dollar.

Recently, I had a customer that wanted a typical, flat painted sign, and I usually use regular MDO. I have had good luck with MDO, having signs out there that have yet to peel after 12 years. The ones that have been out there the longest were painted using my old method. Caulk the edges, latex...

Up here in Maine, most shops charge a per square foot rate. Some charge 10.00 per sq. ft. and get it. Here in Augusta, I get only 7.00 per sq. ft. since there are 2, maybe you could give a small discount.