• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Recent content by Mimaki repair up north

  1. T series cutoff only queation

    Good idea
  2.

    CJV150 not working.

    Agree
  3.

    CJV150 not working.

    Sounds like the head or slider board is faulty

  4. Rastek printer wanted

    H650 or T660

  5. Question I ve to let my CJV30 during 3 Weeks alone :(

    The best option is to initiate a nozzle wash from the maintenance menu and fill the cap with liquid. When it asks how long to want to leave it set it to 99min. When the machine starts counting down from 99 min switch the power off on the side of the machine. When you return for your trip switch...

  6. Need Help How do I set up contour cutting on my Mimaki CG-60SRIII?

    If the end key is not working press the function key and go to setup. In setup look for mark Detect and click enter. Make sure mark end key start and mark detect is switch on.
  7.

    XC540

    If you feel confident removed the damper on the cyan and magenta head and with a syringe push cleaning fluid gently through the head manifold to unclog the blocked nozzles. You could also clamp the waste ink lines coming from below the cap and then fill the cap with cleaning solution. If you...
  8.

    Need Help mimaki cjv150-160 majenta dusting

    Might look slightly better but still going to get overspray on magenta and banding in the print. If you want it looking perfect it’s a new print head.
  9.

    Need Help mimaki cjv150-160 majenta dusting

    Damage to nozzle surface, possible head strike on media
  10.

    Need Help mimaki cjv150-160 majenta dusting

    100% head failure unfortunately
See more
Top