Recent content by New to Printing

I have been running a Mutoh VJ1204 and a Vinyl Express Qe54 for 5-6 years now. I have been using Ve Lxi Rip Design and Rip for all the printing and cutting. I have been speaking with a couple different companies regarding a replacement of the mutoh and currently looking to purchase a Mimaki...

Well if you've been back there you'll know its impossible to test all of them without taking the board out of the printer. So that is what I did. Board came out. tested all (3) fuses with a meter for continuity and all (3) were good. Put it back in and now I have more problems... looks like a...

Does anyone suggest a company that will come take a look at a Mutoh Printer?

Does anyone have a recommendation for a service in Northern New Jersey?

So looks like the (2) fuses both are good. Bad head cable should be my next try?

Now that is one thing I have not changed on this printer. Any chance you have the manual with fuse locations?

Guys and Girls, I have had this printer for 5 years now. We have been threw alot. I have become pretty knowledgeable about the old lady she is. Today she gave me a curve ball. I printed a simple print Sunday night with no issues. Today I turned her on went threw a cleaning cycle (checked and...

Haha, something I would say.. Its going to come back out I guess. Start over. Anyone know where the adjustment on the right of the print head carriage should be? Never moved it before, but do not see much in the manual or online regarding it?

Hey all, I recently had an issue with my 1204. Replaced the print head and have it all back together. Ran it through some cleaning cycles, I am getting perfect nozzle checks, and also completed both N and Q Alignments. I am printing on the same material with the same profile as I did before I...

Hey all, I ended up changing out the print head with a brand new head. Getting perfect, full nozzles on my checks, not getting the cyan spray I was getting with the old head. I now have a different problem I have never had before. Still using the same profiles for the material i used in the...

No good on the ribbon cables and dampers. Head is next. Stay Tuned.

Ordered new ribbon cables, and new dampers. Really hoping its not the head. Ill keep you posted! thanks for the help! These things don't seem to happen until I am swamped!

Thank you! it is just cyan! Everything else is printing just fine. worth a shot before buying a new head.

Hey Guys, I've had this printer for a couple of years now and shes been threw some ups and downs. A couple maintenance stations, nothing too serious. I have been printing none stop for a couple weeks now with no issues until this. Looks like its a bad nozzle maybe?, but when I run a nozzle...

This as well???