Recent content by teddybier

You could also use the customcut option and set the page space as desired.

Hi from the northern part of our little country :-):Welcome:

just pushing the end button when the CG asks for the first mark also gets it out of mark detect mode and in "normal vinyl cutting mode". Its a lot easier and faster (imho) this way instead of having to dig in the menu to turn it on and off.

on my cg-130 fx its under the "tool" button.

At the moment im still working around this problem, but does anyone know a way to tell the plotter the precise distances between the crop marks?

Welkom :Welcome:

Welcome from Europe :Welcome:

Welcome and good luck from Holland :-)

The tech guy who installed the machine here did it by default on all machines he sold. And indeed, its open on short runs, and closed on longer jobs.

Hello guys and gals, Ive got a little problem with my Mimaki plotter, when i contour cut, the machine does not seem to measure the register marks correctly, and is off by about 1 centimeter. After going trough all the settings on the phone with a tech guy he thought there was something wrong...

Has anyone seen this image (the bue bird with the mexican hat) for sale anywhere? All i got from my client was this rather low res image. Thanks a lot for your effort. :-)

Autoschade is a dutch word, meaning car damage. :-)

Hello everyone, Ive got a Mimaki CG 130-FX, and sometimes when i plot, the machine stops after a couple of centimeters, usually about 20-30 cm. The machine asks then "sheet or roll" and measures it, same behaviour as when you load a new roll, or boot the machine. usually this happends only...

Welcome from Holland :-)

Thanks Jim, i'll look into it. But the design isn't mine, i'm only asked to do some apparel for them, so i cant change too much :-)