Recent content by thetomsid1

Help! My Mimaki CJV30 has started to have an issue. One day to the next, this overspray on magenta has appeared. I run the machine Uni-Directional, 24 Pass with Fast Print OFF. I have tried everything, Manual Cleaning, Nozzle Washes, Hard/Normal/Soft Cleans, cleaned capping top, new wiper...

Hello, Is there anyway to tell the date of manufacturer via the "Batch / Lot" number on the box of Hexis vinyl. Here is the Lot/batch code: B628911C Thanks

Hello, So I have been using Nutec S10 inks for about 2 years now. However after the price has been bumped up by my local supplier, I decided to do some research and found that I can get Original Mimaki SS21 inks for literally a couple euros more at digiprint supplies. My question, My Yellow...

Hello, So I have a sign writing job to do with black vinyl. However is there a way to cut black vinyl on the mimaki Cjv30 machine without registered marks? I say without registered marks, because the registered marks are printed in black and will not show up on the black vinyl. Any help is...

Attached is a picture of the print test. I do these daily. Just 1 small block of cyan and magenta is missing, this has been like this ever since I can remember, but the overspray problem has just started recently. Could it have something to do with the cold weather? Or I have read do you think...

I have a Mimaki CJV30 and just recently it has developed a small strange problem. Attached are some pictures. Basically when I print black, there is a cyan overspray. This only happens on black and horizontally, see "L" shape mark to understand what I mean by horizontally. This has been...

Update: It was indeed the laminate that was the problem. Ordered a new roll and decals are perfect again :thumb:

Hi, Thanks for your reply. Yes when it is lifted like that on the cut line is it ridiculously easy to peel off. I bought about 5 rolls of laminate just over a year ago when I first started, I'm on my last roll now so it is looking very likely that it is "out of date". Would you agree? I'll...

Hello everyone, I have been printing and laminating stickers for just over a year now, and just recently (month or so) I have been having problems with my laminate. So the problem is that after printing, laminating and the finally cutting it seems just after a few minutes the laminate is...

There you go, just thought of that so I edited my post :D

Just to let everyone know I have managed to do it, thanks for all the replies :thumb: If anyone else is wondering how: - Set up your document with the registered marks & cut lines; - Send to rasterlink with the print & cut boxes selected; - In rasterlink click on rip & print only; - Laminate...

I have done what you just said, I have printed and laminated then I put it back in the machine while I was in cut mode I put the laser cut mark in the center of the 1st "L" mark, then I press enter it detects all four marks. After that I put the machine in remote go back to my computer and back...

Hello everyone, I need a little bit of help. Basically what I'm trying to do is print some stickers using the CJV30, then laminate them with my laminator, then after they have been laminated put them through the CJV30 for it to cut. I have just tried to print one sticker (it has the registered...