Recent content by wilmingtonsigns

Long print head cables Also called Carriage cable card, or Slider cable card, or Long flat cable card was a problem. Yellow lines are gone. I got cables at http://www.extremeinkjet.com/Roland_...SP540_s/63.htm Dwaine is very helpful and nice to do business with . Good luck.

I got cables at http://www.extremeinkjet.com/Roland_...SP540_s/63.htm Dwaine is very helpful and nice to do business with

Long print head cables Also called Carriage cable card, or Slider cable card, or Long flat cable card was a problem. Yellow lines are gone.

I need to replace long print head cables Also called Carriage cable card, or Slider cable card, or Long flat cable card , the ones that go from headboard to main board and Any instructions, suggestions would be appreciated.(it's not described in service manual)

Where can I find a trailing cable assembly for a Roland SP 540V? Thanks.

Can you please ask your Roland rep to look at the string we posted. Thanks.

Has the problem been resolved? We have a similar problem that started w/a single 1/16" yellow streak and escalated to printed yellow blocks. Please look at the string http://www.signs101.com/forums/showthread.php?117092-Roland-sp540v-yellow-lines-random Thanks.

The problem is getting worse. It' s starting to look like majenta head before I replaced it. Like I said it is 4 months old I bought it from Solvent Ink Jet in Denver Co. The head should be good, I purchased a black and cyan head from them and its been fine for a year now. Any thoughts? Thanks

pick

The problem is getting worse. It' s starting to look like majenta head before I replaced it. Like I said it is 4 months old I bought it from Solvent Ink Jet in Denver Co. The head should be good, I purchased a black and cyan head from them and its been fine for a year now. Any thoughts? Thanks

I found a Verizon router on the same electrical circuit as the printer. I moved it to another outlet. The printer printed w/out yellow streaks for a few hours.I thought problem solved. Streaks came back tonight, I turned off main power, turned it back on and reprinted the same file w/o streaks...

yes I did

All the cables and contacts were checked thx.

Yes, the test print is perfect.

The lines are 1/16" - 1/4" and approx. 3"L N to S, vertical. Usually the same distance from the right hand side. I cleaned the encoder tape real well, it's only 3 months old. I cleaned the carriage board (there was some ink spray on it). The head is about 4 months old. Any help is appreciated.