Search results

What is happening is this, say you need to print 100 copies of 3 different signs on Coloplast, in onyx I would set my page size to 48x96 and onyx would nest the signs into however many sheets I need, each sheet would get it's own barcode and cut file for the digital cutter to read. Now you load...

Yeah I'm not usually someone to test new software, I've been burned before, however when I upgraded from 12 to 22.5 it came with a year of free updates, and that year is running out soon so I thought I would get the latest and greatest....

I've gotten the best blacks by using RGB black, it converts to a beautiful deep black on our epson s80600. The laminate you are using sounds like an inexpensive general purpose laminate, if you step up to a 2 mil wrap laminate you won't get any colour shift, and the gloss level is so much...

Yeah i still have 22.5 installed as well luckily. My Onyx advantage subscription is running out in about a month, I asked the tech is this issue isn;t fixed by then, am i going to be forced to purchase another year to get it working? He wasn't sure... Seems like a good business model, release...

Turns out I can, but only because just out of shear luck, all the sheets i've printed so far are identical there are 2 designs that I needed a high quantity of and when onyx nested them it just so happened it nested 6 of the larger signs and 10 of the smaller signs per sheet, and I noticed it...

Just to give everyone a heads up, there is a known issue in Onyx 24 where printing multiple pages will not generate a cut file for each page. I have a job to print a few hundred safety signs, I'm printing on vinyl then mounting to coroplast to cut out on our summa F1612. i set my page size in...

yes, the 40600,60600 & 80600 all use the same inks, the only difference is the 60600 is dual CMYK and the 80600 has additional colours available (red, orange, LC,LM, LK, White, Silver)

check your PM's

I usually put shipping cost TBD on my quotes, if they insist on knowing I tell them that I'm going to make an educated guess, then add a healthy margin to cover me in case I'm wrong and they will pay less if they let me bill out actual cost at the time of shipment, but some companies need the...

Everything I've read and seen about these trucks is horrible, but I guess the plus is that it's simple to wrap...

We have a few non profit groups around here that come to us, but not for all their Signage, they might get a banner from us, but yard signs from another local shop, and postcards from another, they spread their spending around, and the reason they do this is they now have a larger vendor pool...

I should also adapt your strategy of donating when God tells me to, as an atheist I would save a fortune!

I think we've all been there before, I have a handful of customers who hit me up every year for their golf tournaments etc. I too have a difficult time saying no and potentially loosing them as a client, but at the end of the day you have to weigh it up. We have one customer who spends around...

Does anyone know this one? I've tried all the usual places and no luck. Thanks

This is the Chinese company I buy from, their knives are great, but their router bits are not. https://www.china-oyea.com/

First off don't buy blades from summa, I get them from China for a fraction of the price, a HD knife from summa is over $100, I pay $5 each, and they last just as long. If you are snapping blades, make sure your speeds are not too fast, and make sure your depth isn't too deep. If your design...

Vibrations are a killer for router bits. I had a similar issue with our 1612 going through router bits too quickly. We recently switched from using the foam routing mat to using 6mm thick MDF, and the vacuum table pulls even better through it and cuts down on the vibrations and moving parts...

Do yourself and your customer a favor and outsource the printing onto the proper film, something like ij180, or at the absolute minimum Ij40c, and do it in 1 piece, install will take literally half the time, and the film is properly rated for vehicles, so they won't come back in a year when it...

I agree, if you do end up sending it to gemini for repair, ask them to break all sharp edges before they re-coat it,it will help reduce the chance of the clear coat chipping in the future.