Search results

A full-color DTF will feel like HTV

Signs365 FireSprint ABA B2 Don't know and highly doubt there are any vendors who use this machine for trade work most are UV

the "cheapest" printhead we have tried is from https://us.digiprint-supplies.com/en so far they are about 75% success rate on a print head being quality

FireSprint.com ABA Visibility Products B2

I'm more concerned / impressed with the lines lying across the boom

We try to use Modified Acrylic "white" 7328 to help with the washout. we also add white vinyl on the 2nd surface if needed, especially if the cabinet is too bright or an LED retrofit

https://www.signs101.com/threads/my-new-sign-installation-command-center-aka-sicc-vehicle-haha.131543/#post-1283508

Where are the videos? are y'all using office chairs or a 2 man team with shopping carts?

We like 3/4" or 1" 40 PVC or 80 PVC (depending on the span) 80 PVC is a thicker wall (More Rigid) instead of 1 LONG piece, we use INLINE COUPLERS so we can make whatever is needed and also collapse whenever needed To keep the pipe centered, we will have the pipe stick out of the pole pocket...

We edge cut perf and then use optically clear lamination to edge wrap and also seal https://www.fellers.com/fellers-shopping/cat/wrap-tools-and-supplies/sub/wrap-care/set/3m-3m-8914es-or-8520-edge-sealing-tape

We are seeing this more often with newer glass or glass that has been treated, rain-x or a like coating We edge wrap with optically clear lamination strips, or we use an edge seal pen

We use MATTE banner It is usually the same or cheaper than paper of the same size

Looking to get 150 + long Sleeve shirts that will require full sublimation printing & sewing

https://www.distributorcentral.com/

strongly advise having the air compressor in a closet or other area and run an airline to the press. even the "quiet" ones will get on your nerves after constantly

I personally use a new thin snap-off blade extended fully, flex it so the blade lays flat on the table, and go over the needed areas Another staffer here uses 80 grit sanding block and another staff used a hand wood planer

https://www.signs101.com/threads/cutting-mats.166534/#post-1545168

Unless you are doing a full wrap, you will have to contour the flag & stars. It will be a total PITA to try and match the "black" background so the printed vinyl looks the same as the vehicle, both color, and shine The text and shield are an overlay to ensure proper alignment. NOTE: the shield...

There is a joyful sensation when telling a customer YOU ARE FIRED!

pretty much............ currently working on a sign for business hours, edit # 9 is the latest version We would like to see a different shade of black for the hours.........