Search results

If I told you where to get it, then there wouldn't be any for me - just kidding I've been ordering 10 yard rolls from whoever has it - Wensco may if you are in one of there areas. - Good Luck!

Just to let you know - Principal LED makes a 3 channel dimmer for their leds - Not sure if it dims all the way to zero but you would be able to dial in a much lower intensity - have the building dept. come out with their light meter to prove you wrong (or make adjustments). I've had 2 similar...

Did you double check your print setting is VW? Check your scale, should be 100% - looks like it is at 1000% - otherwise i have no clue.

Some points that come to mind - The associated expenses that come with printing ie. - maintenance, medias with use by dates and other consumables. The cost to maintain software, employees... A commercial business can spread those cost over all of his jobs, in other words, keeping the ship...

I have no suggestions as how to make but IMO it would look better attached to the deck above the bushes

also, check your encoder strip and clean with alcohol swab if necessary. Also check the media feed encoder. Had an ink xplosion once and the feed encoder got ink on the encoder disk caused a feed problem.

check your left pinch roller for pressure on the media - left and right are different part #'s should you replace

Ask these guys - it lasted til the wind blew his talents to Miami -

I can visualize the sign now " Banners - Yard Signs - Kidneys & Livers" I'll sign on when Fellers has stock - oh ya' throw in a roll of black vinyl... too - what?? out of stock on black vinyl?

The tips above seem reasonable - My initial thought was to cut a little wide and use hem glue - or take to a seamstress.

Look at this - https://trafficsafetyproducts.net/sign-posts/sign-post-hardware/stainless-steel-banding.html We use it and it works great - they have the clamps and binders too

Al else considered and there were many good suggestions - try to design in terms of scale - the taller the letter/graphic, the bigger the overall size - maybe increase the material depth to keep thing in scale.

Please send picture of the whores and the goat.

You might try these guys - have done a lot with them over the years - they are great to work with - https://signmaster.com/

I also may mention that due to their logo changing every once in a while - instead of painting the logo on an otherwise 2nd surface, I opted to apply the logo in the closest translucent color vinyl and apply it to the first surface - they were happy and if the logo should change in the future it...

From my experience in Ohio - Called the State Board of Liquor Control - got to the right person and they sent the spec sheet of how their logo was to be used - size, separation, color etc... See if can contact the TABC by phone and get the rules.

Check out Showdown Displays - https://www.showdowndisplays.com/

Sorry i meant to say 50% power and 65% speed

Hi Gary, Thanks for the info - I have already done notations on different materials and get good results, I was just trying to find a way to push the limits. it was suggested that I run a raster at 100% power and 70% speed with 500 ppi - did a test on Gemini duet xt and raster was not good -...