Search results

Thanks, I'll try that out

Using a 35 watt Universal Co2 Lasering Duets and Rowmark Laser XT Issue - Raster engraving seems like it could be a bit faster - vector cuts good enough Question - What is the relationship between Power, speed and PPI Can raster up to 1000 PPI I am rastering at 500 PPI, 50% power and 65%...

I've had the same problem over the years and it seems like it's a problem with available ram. I shut a few things down - sometimes a re-boot, and it woks better.

I agree with Brad - we would sand and clean, use Matthews etch primer and then overcoat - problem is that Matthews is back ordered on a lot of products. At this point, there are rattle cans of aluminum primer in supply and then top coat with another rattle can. We will use rattle cans on small...

I agree with all the comments - not mentioned is the point that a pan formed face is used not only for strength, but for sufficient spacing with the light source. Make sure your cabinet is deep enough to prevent spotting.

I agree with just about everyone on this thread... Leasing a shop location is a huge nut to crack every month... I cna't give you advise but I have a friend who works out of his house, located on a main drag. He has a garage and a shop on the property. I nice set up - Consider buying a new...

This same type of problem was discussed several years ago as we ran into a problem with the paint sheen. The paint had an eggshell finish and the laminated vinyl print fell off the wall twice (installed by others), I did some research to find out the eggshell was the culprit. recommended that...

Harbor Sales on the east coast - not sure about circles. 800-345-1712- worth a call to check

I had a Mutoh at one time and Wasatch was the RIP that I used. Worked good.

You may have to cut a contour around the reg. marks

Not a lot of experience with this, but is there a reason why you could not simply cut a box in the cut file or manually cut a box around the registration marks, weed it off and then run the actual job through your plotter? It adds another step, but may be a short term fix.

I have to chime in here - Ya'll really crack me up. It's the best entertainment for the buck! I did notice however there was no mention of UL listings or certification. Let's keep it real.

Thank you, thank you, thank you

41 view and no help yet - I had a feeling this was a tough one.

anybody have a guess - I already vectored what I saw - see picture - could not get a match on find my font - client is busting aggotts over the stroke width - it could be a custom font - any help is appreciated. Thanks

In the areas we service, permits are usually necessary. Zoning Permits are sometimes different from Building Permits. If we do a job in a township, the county may require a building permit. I have found that if Zoning permits are required, and a customer does not want to pay for his permit, the...

Obviously they need to be tall enough to handle the letter height properly - they don't need to be as deep to contain an/the LED power supply(s). Remote power supplies can simply use a wire way.

As far as I know you can rent Flexi for a month and try it out.

This is how we do it - see pic

Let's not forget the ever popular 70T Tank.