Search results

I have a Graphtec 8600 64" running off Cut Master 4 I been printing and cutting for years, suddenly this happened. Cuts are going way outside the bleed. Not sure what or why. I ran an offset diagnostic and if I am doing it right its way off, but my counter measures did nothing. Oddly a cut...

I run Cutmaster 4 off a MAC for my Graphtec. Lately my Mac has been buggy. So I would like to update, sometimes when I do this though cut master has not been updated to allow for this shutting us down. So I am a bit reluctant to update. I cant tell from the website if this is something that is...

thanks so much for the words of wisdom! Good to know about my UV too, it was in a semi dark room, no direct sun.

I did a manual cleaning on my ROLAND UV printer, thought I closed it all up and left the shop. Came back today to see it did not complete the cleaning cycle after the manual cleaning. Apparently the cover was just off the sensor, so the printer thought it was still off. I ran a test plot (all...

Mimaki makes a cutter? I had a summa and it was a lemon, could not cut a straight line and I hated the software. Might be in the market for a new plotter soon though, today was ok, but we use out plotters so much I don't mind getting another 30" of another brand to try

I contacted Oracal today they said there has not been any changes but to send the lot number as it could be I am just getting bad lots. I cut today with no issues so sometimes I do wonder if it's static that causes it?

when you say buckling do you mean from it getting damp? Someone else suggested static could be causing this. we have a lot of shocking going on in our shop from static. maybe that?

Out of the blue, both my plotters have been cutting inconsistently. I cut a lot of text panels for museums and galleries. 1/2" -3/4" text that usually weeds with a few I dots missing and a couple letters. Recently across 2 plotters, I loose about 25% of my letters. sometimes 75%. The colors it...

amazing! Any chance you could make me up that 3d thing? Or provide the file. Happy to pay for this. I am sooo busy and dont have the tech savvy mind that you do begin to figure it out. Any pics or diagrams?

I suppose this means every time I manually clean it that is a big blast of VOC right? The Data sheet says they are only harmful as not cured. Well the whole capping station is uncured! Would you recommend the Roland brand scrubber or the other one mentioned Amaicare on this thread?

Hi Joseph, Do you happen to have a a picture of this? I thought about doing this, I have a separate room I can put it in and thought to pipe it out that window, my only concern is temperature? Want that window being open cause temps below 60 degrees in the winter? Maybe not if all the air is...

FYi I am prob going to sell this thing, Yeah I am going to sell it. Big purchase, but I cant take this shit anymore making me all sorts of dizzy. I dont trust the safety sheets either, if its just the ink that the fact that it gets into my clothes means its vapor in the air even when its not...

Can you elaborate?

I can't seem to get a straight answer though on the harm, do they cause cancer?

Just wondering how the attached air scrubber does on smell? I did not realize how much smell these uv's give off. It's getting into my clothes and makes me dizzy. I got about 1000 sq ft with plenty of windows (closed now for winter) 10 ft ceiling. anyone have a UV that successfully dealt with...

I got a space heater and turns out building is at 60 so problem solved, now for the smell, its so bad I am considering the air scrubber do those work well to solve the smell?

update got. a space heater, building is at 60 problem solved, now what to do on the smell! does the filter help with that?

My shop usually stays at 50-60 overnight, but its been pretty cold up here so I think the system just doesn't keep up. Just got a wifi space heater which can be monitored remotely and prob gonna have to get a heat pump for the long term fix. But yeah wished I had known! d

My shop is in a building with old school heating which shuts off and goes to 50degrees min to prevent pipe freeze. The other day the printer would not start up in the am cause of this. My question is is this bad? I cant seem to get a straight answer from Roland, and I dont want to run a space...

does this mean all prints on a UV will smell forever? or does the smell go away over time?