Search results

https://www.homedepot.ca/product/ryobi-link-modular-tool-storage-set-3-piece/1001690552?eid=PS_GOOGLE_D00%20-%20E-Comm_GGL_Shopping_PLA_EN_All%20Products_All%20Products__PRODUCT_GROUP_pla-294357661102&gclid=Cj0KCQjw6KunBhDxARIsAKFUGs8EP-PriSN4onYsWUd_BIaHLckl-BE_jmzfpC8MZ37T-OlGQlChpFYaAmiPEALw_w...

Are you going to offer an off the shelf solution, or a custom, or a mix? any idea on costing? I'm guessing built in FileMaker... I haven't played with FileMaker much, but is whatever you provide going to be "open source" in the sense we can edit it / customize it to our liking, if we have a...

http://www.yellotools.us/BodyGuard-Knife-Twin.html Going to throw this out there, except you can get an amazon one for half the price... IMO the bodyguard is worth the premium, we went from a cheapo one to a few different bodyguards. You can slit the backing paper in the mid - Tack it onto...

I think i like it better without holes because of our Real estate companies. Macdonald is as big, if not more popular in BC as Remax - They re-branded about 6 years ago... And now all their text falls within the grommet area. And being an "Approved" Vendor...we're not allowed to change the...

You guys grommet your acm? We usually just drill holes, never had them rip or anything... Except one time when some dumbass hung a 24in wide by 24 "Ryder," through it and we had a huge wind storm. We don't get much windy weather though so maybe it's just not a problem for our area

This is why they make different tac vinyls. We do a lot of hospital work, and they use no voc, anti germ stuff that most vinyls won't stick to.... Wall vinyl and our usual ij40 just fall right off. But we found if we use ij35, it sticks perfect - there are downsides though.... It comes off...

We use 3mm alupanel or .081 allum if they want really long lasting.. .040 would be pretty bendy imo for a hanging sign.

Vacuum wouldn't help. The problem is (at least with SAV) is the glue trends to make the dust stick everywhere. The teeth chew up the vinyl, whereas a non teeth blade slices it.... That's why I want to get a non teeth blade one day and see how it does. Production splitters are the same...

We use a sliding miter saw. You tape it up with a few rounds of tape and just cut it down.... We use a fine tooth, but I've wanted to get a non tooth one and see how it does. It's a little rough on the edge, but still works ok. I've looked and looked.for a slitter, they're all for...

Not my desk anymore... So ignore the mess. The whole thing was this shitty marble pattern that looks like it's from the 50s. We had some leftover.dinoc from a job so I wrapped it, just checked and I only see one scrape in the corner.... Which may have been my shitty install job

Is it cutting line by line, orndod it cut that u at the end? I've had it happen where it cut every letter BUT the insides.... Cut like 7 ft of letters, went back to do the insides and the material shifted and ended up cutting way off. Theretically you should be able to cut something, have...

Dinoc is great, expensive but great. We have completely done interiors of buildings and upgraded them from looking like they were from the 70s to a completely modern look. We've done a few yacht interiors as well, you can completely change the look of something and the material is very...

Korean banner is way better than Chinese banner!

Would a floor lamp not have anti slip properties to it? In which case it may last longer.... But people don't want anti slip to mess with their mouse gliding id think. I've never tried it, so I don't know how much of a difference it'd make... Maybe not enough to be an issue in an office...

Look into architectural film. It's way thicker and built to withstand use like this. 3m has dinoc, not sure about the rest... It's expensive, but it's whole purpose is to last a long time in high use situations.

We looked into it, our machine was offered the braille option by Multicam when we first got it... I've talked to them half a dozen times about them adding it, but they say theyll look into it and never get back to me. Looking into it it uses a chuck thats slightly bigger than the max our...

We do probably a dozen lamacoid orders a month to that we outsource... Maybe 10 signs an order? So let's say 120 signs a year. We get charged a $45 proof fee for each order.... Then like $30 per sign, and we're talking small 2-3" by 10" signs. So $400 per order x 12...about $4800 a year? Not...

My buddy has a trotec, and I liked it so I bought an omtech. Trotecs... Just work. All the cut settings and everything is pre done, it has a nice camera.... Good support, decent software. It's the cadilack of lasers. The. You have omtech. A 100 watt tube could be 110 watt, or 90 watt ...

Those are the people that price you out of a job. print time, finishing time, travel time, cleaning time, application time, aproval time... you're probably looking at a full days worth of work, for $280. Theres a lot of people around here who will do it at that price... just to get their foot...

Slippery slope.. I started with a graphtec in my basemeent, now I have 2 wide format printer, laser cutter, and a graphtec... Once you see how much money you can make, its worth it! I'd say go for it. Personally... I'd tell them if they let you have the plotter / everything else for XX...