Search results

I am on 9.1 now and may need to upgrade one day but I have 6 copies so it isn't going to be a cheap deal. Also I cannot see enough change to warrant the upgrade. I always found the RIP part of the program was a very complicated and it was as if Cadlink expected you to set up profiles. I am...

Is this a damper issue, as it only shows on some colours at the left hand side of a large width print? Thanks SC

Here is the picture you have been waiting for. Sorry but I forgot to attach it yesterday. SC

I have a customer who is looking for flat cut acrylic letters bonded directly to a rendered wall like the picture attached. Do you know how I would go about fixing these and with what? SC

Is anyone using Nazdar 203 inks in VersaEXPRESS RF-640 4 colour machine?

I have a current client that I am doing a large job for. His logo has a specific pink pantone colour. He insisted that it had to be a perfect match. So I went over to his premises with some good colour matched solid vinyl colours and six variations of the colour printed from my Roland RF-640...

Roland VersaEXPRESS RF-640

Not yet as I am trying to see if Nazdar are having issues. My feedback from them is sounding more and more that they are having issues and are wanting to swap me over to their 202 series inks which are Nazdars version of MAX 2 inks. Just need to find out if anyone else is using Nazdar 203 inks...

I am currently using Nazdar 203 inks (Their version of Roland MAX 3 inks). If you see my previous posts I am having issues with the yellow ink which is I have been told by another ink supplier is caused by differences of surface tensions of the inks. This is causing the ink to pool on certain...

How i prep and clean the windows is what I have used for decades with no issues. The window company that is used to replace the glass is not being very helpful. It is as if there is a coating on the glass but it shouldn't matter. Has anyone else come across glass panels with a coating? SC

Over the years I have had varying success covering acrylic this way mainly due to the static from the acrylic and that it has minute bits from when it was cut. I have a large job that has to be covered as the customer insisted it was to be a certain colour. Any help would be appreciated. Thanks SC

I have had some horrific failures of cut LG Etch LC5510 of late which was to some replacement bar windows (very rough place!). This had been applied exactly the same way with the same roll and within days it was falling of the window, as if some sort of coating was affecting it. Cleaning and...

Where do you purchase that from? Thanks SC

I have a few jobs lately that are failing when applied to glass in etch and printed one way vision. My thoughts on this is that there is some sort of coating on the glass surface that is impeding adhesion. SC

The Preserve Primary Colours is selected. This makes no difference if on or or off, besides only CMYK are primary colours on this machine. SC

I have colours printing that should be pure yellow but have a uniform cyan slight print when looked at with a loupe. This is giving a slight green tinge to my yellow prints on my Versa Express RF-640 4 colour which is just over two years old with a perfect test print. I am running Versaworks...

Many years ago we dealt with a company in Italy that made a banner vinyl that was perfect to graphic up Curtain side wagons. After using this very successfully for a number of years the company that was selling this launched a new truck vinyl which was made specifically for curtain sided wagons...

I have previously used Avery MPI 2800 on these doors and after 3-4 years it looked as good as the day we fitted it. We replaced these prints just before Christmas with the same Avery MPI 2800 and it is all ligfting on the edges and joins. I have since found out that Avery have changed the...

This has more of a leatherette effect than a pebble texture almost like building steel cladding. SC

I have some large garage doors that are steel with a textured pvc facing that want some contour cut vinyl prints applied to them. What would the mprint media you would use for this type of job? The reason I am asking is what has been used before has not adhered very well especially at the points...