Search results

https://www.circlegraphicsonline.com/

Nope. If you start a new transparent SAV media preset you can't calibrate that either. Probably use RIP linearization for the ability to re-linearize but with Caldera you can't force 100% of each color. I have to edit it later and I suppose re-linearization would remove that forcing me to edit...

It is just amazing the difference between the preset from Transparent SAV and regular SAV. What in the world would account for that? Can't see were the RIP setting would make any difference between those two presets? In fact I ran the same job only changing the media and it associated ICC...

WTF why and how did they do that with transparent SAV media preset and not the SAV preset? Seems to work without that OC beyond the edges of raster objects. Looks like I have a lot more profiles to build but why do that on a preset that doesn't support calibration.

This has happened a number of times now. PDF sent with raster elements that does not have pure white beyond the edges. For yards signs I don't worry about but for POS stuff it looks crapy. Not real practical to try to add a 1% raster over the whole job so that OC prints over the whole job, or...

I could give you a long story but I have already waisted way to much of my time dealing with Canva junk. That might have just sent me a pencil drawing instead of wasting their time in Canva for something they wanted printed which I had to recreate anyway. Already told them about Affinity...

Anybody using this and know of a USA source for this waterslide decal film. https://www.transfertpress.com/videos/advices-tips_4/how-to-apply-ecosolvent-waterslide-decal-roland_103

ezPaycheck, https://www.halfpricesoft.com/index.asp Download trial and try it. No exorbitant fees, no internet needed, Windows or Mac. Simple and works.

If you can print white on clear perforated window film. https://www.contravision.com/print-substrates/clear/

Is it still under warranty? If so call HP. They will have you do a couple of tests. I have similar issue and when we ran a test I threw some kind of sensor error. Part are here now to replace next week.

I am beginning to wonder if I got a miss-labeled roll of .020 MuscleMag. Is the back shinny/glossy? Does the print surface crinkle? What I know at this point what with this magnet material what ever it is it will not feed in the 700W. It just slips on the grit roller no matter what setting...

Somewhere in this video the pinch roller pressure in mentioned.

I don't believe that is the case as there is a HP video out that states that the Fabric media setting has less pinch pressure. In a little if testing I have done so far it seams like PVC Banner may have more pitch roller pressure.

Yes I noticed that. I am beginning to wonder do the media types have different pinch roller pressure?

Are you guys using the curing platen covers? I have all the tension setting maxed out. I can feed forward ok with tension but backward it is no go. .020 MuscleMag

I was pulling it out the front but will have to try adding weights or attaching to the take-up.

The platens are plastic. That is not where the issue is.

I tried very 5 different combinations of input tension and it still slips. I don't think it is possible to run magnetic media in this printer. The metal that is in the feed path, especially the metal on the upper side which is on the bottom of the media is impossible not to attract the magnetic...

The user guide and HP videos says you should be able to print on magnetic media. The ones I have tried on the L360 had no feeding issues but on the 700W the feed rollers move but the media does not. I loaded the MuscleMag preset and that does the same thing with MuscleMag. Just sits there and...

Color will never match like that. Does Flexi have the ability to change output values? If so you can change one the CMYK builds to match the other one.