Search results

We have one built in to our site. We dont touch customer files. even if we see issues. The thing is, if we change something and they complain about it, we have to do it again.

when you open thrive. on the console it gives you your IP address with a port number eg http://192.168.1.20 or it'll give you something like http://workstation (your pc name) and you can log into it. If you use a VPN you can log into the thrive console from anywhere in the world.

this is how mine works too. we have 2 printers / 4 RIP engines. If onyx is installed on 2 pcs with 1 printer/2 RIPS and running. The other PC with onyx can only run with the rescores not in use. So say i changed 1 PC to use 2 printers/4 RIPS. then the other PC will say 0 and wont allow you to...

*** only on the Gold advantage plan.

how on earth are you using so much white ink on maintenance. we hardly use much on maintenance. Purge once a day. twice if it's on heavy use on white ink (sometimes i needs a clean as it picks up dust) And as mentioned. You dont market white ink. you market the product with white ink. only a...

this has to be the worst advice. create media profiles both both machines on your RIP Software. this 90% of the time solves all colour consistency issues between 2 printers. the other 10% is being HP and their consumable heads.

I would have a term in the contract stating all signage installed etc etc etc will remain the property of (your sign shop) until full payment has been made and cleared. We have the right to enter and remove all signage if payment hasn't been made with in X amount of days from install date...

For software like this. You're better of getting a full demo and a quote from them. To me it looks like a module based system, you pay for the features you need. It wouldn't surprise me if it's something from $3000 - $10,000 per year.

what did you get the M3 or M5? that is low volume for the colorado though, you can do the 3 boxes in 4 hours... The M3 is probably the one you want, but the colorado inks go into a tank, you dont want them expiring on you. you'll need a tech to drain the tanks.

id be looking at gradients and photos with the different dot patterns. thats where it matters most. i dont have exp with flexi so can't help too much there. i1 profiler does a great job, and you can do a gamut size compare in there. you can also compare to a standard and other profiles, but...

how close are you analysing your prints? Stochastic works fine for most printers. Unless some have a built in hardware where it does it itself and i think you leave it in contone in onyx (i forget) and im pretty sure this is what epson does when using the epson profile workflow. this is how we...

You can use custom profiles and tweak the GCR to use less ink.

Hi, are you able to share the action for this? i'd love to check it out,

Polished concrete in a showroom, yes. in a work environment. no. They till still scratch and abrase easily. and stain if any chemical is dropped on it.

We're going though a ground up build at the moment. We dont do vinyl wrapping so we dont have the issues you do. Here's some pointers: - Smooth floors. if you have the funds to do so, get the concrete ground back, then use epoxy. Easier to keep clean. As for vinyl sticking to the floor...

Open VPN. It's free. On android. Open VPN and use RD Client. And you can rdp into any on the network.

I use VPN and RDP. It's easier (for me) When i use the VPN I can RDP in to my RIP PC or any VM on my server. And i can just SSH (PuTTY) into other VMs. It's like im at work, at home. Also if you have a network licence, like onyx thrive, you can still use it.

This... This is very common. Especially for industry specific software. RDP into your work computer. Set up a VPN with openVPN. or use Teamviewer or Anydesk.

Enfocus pitstop server is probably what you need. That will check bleeds, add beeds, add cut paths. Etc (you'll still need to set it up to do that) Pitstop server comes with a basic version of switch so you can rout jobs though different folders depending on variables. Nesting you'll need...

I wouldn't hold my breath. If you want to cut e-flute, buy the right equipment. I probably wouldn't even waste my money on the FCX. I would save up and buy a colex 1717.