Search results

Awesome to see you on here and to hear about more tools coming soon! We ordered 5 or 6 squeegees yesterday for our guys to try out; I'll post up their true responses once we get them for those interested.

I have one for a 30670, but those are slightly different. Could the bushings be work out on the rails? Can you see what part is dragging? The media sensor can come loose and hang down.

You can adjust the head height easily (3 settings IIRC) within your material settings on the front of the printer. If it is still hitting then you either have a materials/heat/humidity issue (buckling) or a major mechanical issue.

Definitely multi-cut this combo.

What have you tried cleaning that printhead with? You should ONLY use 99% ISO Alcohol to clean it , try cleaning it a few more times and see if it gets better. It looks like it has tape stuck on it. I've never seen one print as bad as the sample you're showing me due to a bad head, usually it is...

Gerber Instachange

Composer also has one in the repeats/merge area!

We're right around 2 here. Currently we are staffed at: 3 sales (including owner, also do billing/payroll) 2 design (also run printers) 4 materials prep (weed/lam/mask/box/etc) 1 receptionist 5 installers

Thanks for the tip, just forwarded their link on to our purchasing dept. Now, if someone would just make the 3M tools....

I cannot help you, but I wanted to add that I struggled with VERY similar issues and they turned out to be un-solvable and we sold our latex and went back to solvent. One thing that may work is running 5+ ft of "garbage" to warm the printer up and change the environment before you start your...

I don't recommend this for a sign shop, but I do have a friend who saves all his empties and also collects the empties from other local shops running the same printers and dumps the colors into the bulk cartridges (shake vigorously, lol) and runs those in his JV3 solvent printers for years now...

You don't want to deal with it sucking dry and getting ink in the lines every time it "runs out", so this is what you have to deal with as opposed to that. We don't like it much either, we have 2 and run the MCS (higher priced inks) in ours, and change out multiple carts daily with our volume...

You can clean the sensor also, that was normally the cause of this error when I had a Roland.

No one here can point me to where this sensor is?

We have the s70675 and I think the metallic out of it sucks, never had a real use for it. When we bought our new printer we just went with a 60600 (dual cmyk).

You should be fine with a final print resolution around 75 dpi and not have "pixelation" issues if you can find a large image. 300 DPI isn't needed or even possible; that's just for fine text on things people are going to be reading up close. Photoshop's "Preserve Details 2.0" re-sampling...

Try: change the color mode, change the image dimensions slightly (you can always change them "back" later). I think one of those things fixed it for me recently. Even a reboot might clear your issue up.

PM Me your email and I will put you in touch with a local guy that will sell you parts. He bought our old machines and has parts machines.

We purchased a used EnVision 375 and everything worked perfect the first time we plugged it in, then we turned it off and on again and it hasn't worked right since. As soon as it finishes booting up the carriage head slams itself into the left wall and says "Y Axis Encoder Failure". Where is...

Through the years I've printed my fair share of back-lit signage, just never back-lit banner. Now, we have a job requiring us to reprint an awning on back-lit banner. This is going inside an arena, over a pizza ordering counter, the banner is lit by fluorescent lights. Should I double-strike it...