Search results

Hate to be the one to point the obvious... If you had read though the "Tips" window. 1. Select the ICC profile you would like to use or create new ICC by clicking the +. So press the green (+) button and go from there

Not sure if this fits your build, but the new microsoft laptops are good. 13 inch https://www.jbhifi.com.au/products/microsoft-surface-laptop-5-13-5-i7-512gb-16gb-black 15 inch https://www.jbhifi.com.au/products/microsoft-surface-laptop-5-15-i7-512gb-16gb-black The asus zenbooks are great...

To vague of a question. Budget? what software do you run? how portable does it need to be?

Both are solid state drives. It's how they work. Sata used a protocol designed for HDDs while nvme uses a protocol designed for nvme. Heaps of articles out there that explain the difference.

This is what i'd recommend. Motherboard: B550 Gigabyte vision. (i have this, it's great) CPU: 5800x RAM: Corsair Vengeance LPX ddr4 3200 (64gb) 2nd set for 128gb but it's honestly overkill. SSD: 500gb Crucial P5 & a 1tb 2nd nvme for your working drive. Heaps of options but the P5 is a good all...

Get a 5800x instead and get better storage, NVME at least 1tb. Get a GTX1660 or similar or a RTX3050. You dont need a workstation GPU.

I know, But OP never said round etc.

This is not a job for the FC9000. Straight Edge and a knife/blade if you dont have the right equipment to cut banner.

UK plug. Easily the best power plug made Anwyay, all PC power supplies use a standard IEC plug. Get one from an old electrical device like your old PC or printer etc.

their website looks the same unless im missing something

IMO this is how it works. As we deal with a lot of trades we know what we can and cannot post. IF your customer asked you to do the full job. I.e create the artwork, print it, install it. Then yeah, you should be allowed to post it as you did the whole job. If you're printing someone elses...

Yep. I had this issue too. Can be annoying. As Signmeupgraphics mentioned. Offset the roll. I've done it a few times. It works. When im printing something that's smaller that the fotoba will struggle to slit, i'd print the start of it. Stop it mark where the fotoba mark is unlock the...

on the RMO? that's pretty normal. It's how the Arizona works.

This one is odd. Where did you install it? I had issues when it was in program files, so i installed mine in C drive (where it originally asked me to) and it worked) I had mongo db errors. worth a shot.

What do you press for UAC warning?

Set up the white ink in illustrator as a spot channel and do a gradient there with opacity from 1% to 100%

Last one is what i had in mind also. Easy to read. the list is inline.

Do a better design change the font You can make that work very easily. and dont forget. The customer is always right. you give them what they want. if they want all those services, then that's what they want to promote Pretty sure they are there, just marked out in red.

If it's not in the list, it's not supported. Different drivers etc. Use CM4 or flexi.

is there any visible damage? or does it look like the holes are stamped out of align? Or is the roller out of align? I think to open it up it needs to be done from underneath.