Search results

there are several MM here that does wrap grade printing. Signs365 is an option, but they do not use Avery

pictures would be helpful are these bubbles large or small? How many bubbles? the pressure is going to have more of a factor than the speed it goes through the machine. when you start, does the lamination have "glass" no sags or wrinkles, what about when you stop? Does the vinyl & lamination...

yes, just have enough velco so the flaps stay connected. NOTE you do not want too sescure, unless you want the video on YouTube of the kids not running through it

got to love it when an old trailer shows up, the customer claims it is clean and ready for install. you wipe a finger across it and turn the finger chalky white, the customer usually just stare wanting to know why extra cleaning is needed and why will it take longer. in addition to the...

https://www.distributorcentral.com/

agree, they are easy to make and whoever you use for rigid / substrate material will have the tracks and letters if needed. Grimco N Glantz Reece we have tried Glue, VHB Tape, and Rivets. the rivets are the only ones we have not had an issue with of failing NOTE: make sure you have the...

yes, that is a question we have had before regarding the PPI and thickness. as a fellow TX, we also see the "bacon" effect and have never tried the thinner material because of this. for the magnets blowing off, we switched from Magnum to CareSafe and have had a drastic reduction of issues...

for heavy ink saturation, we like to leave a white border on all sides. IMO that vinyl is overkill, would use a private label BigfishDM has a range of options we have used InstantOneMedia with good results

assuming you have already checked inside the core to see if there are any markings

there are SEVERAL threads already about this topic. Would suggest using the serachfunction here is a helpful comparison http://read.uberflip.com/i/839464-july-17/22?

How we do welding. Have the flat trim already bent to the desired radius before start welding High QTY, use a JIG for easier alignment Low QTY, Use 2 people if you are bending as welding. Use a grinder to flush / smooth the edges Looking close at you images, the edge trim was welded and...

Pretty much. if you are a repeat customer, who is pleasant to work with. you get more perks and freebies than the PITA In the end, time is money and how I spend my time is at MY discresion. To add to this, it means that companies policies it will be clearly posted stating that designs...

try using https://www.whatfontis.com/ was suggested to us by SignsSupport this is one of the best URL versions we have tried

We use 290 Gloss, have never had an issue with a reduction of reflective properties

clearly that day was missed on training

This is EXACTLY the case 99% of the time

Yes, remember this situation and from what I have heard even after these years they are still known for it https://signs101.com/threads/a-wrap-that-makes-people-call-911.110010/

the tank wrap from Arizona and Lorry trucks are always interesting

Polystyrene is the preferred material for reusable paint stencils. best way to cut is a flat bed. if not available, then overlay a vinyl template, cut by hand, then peel the vinyl off

there are red flags all over these messages, correct, NEVER open any attachment you do not know the content of and all suspicious emails are deleted that have attachments