Search results

CE4M and CE2 almost identical. The pinouts are the same. The internal heat temp. resistor values also identical. But there are differences: - 5pL drop volume (binary mode) - waveform characteristics (AL2-6) - cover Arizonas use the drop levels 1-2-3-4-6. Each levels are the multiplications of...

Hi there, I am in the same situation. Could you give me any info about this, if you have any news? I also try to get datasheets or other related stuff, about these toshiba tec printhead family. If somebody have any related info, please inform us. Thank you so mutch!!! GregK

Hello JWMurphy, I also have a 480 too. I got manual for it. PM sent...

Thank you very mutch, Sir! :) I'm glad to help.

Thanks for the detailed ansver! I hope your machine will be running smooth, but the experience says other. If the beacon cable broken, it should affect only the green light. One of my 350xt hasnt got this cable and beacon light also missing. I highly recommend to buy a new FIREWIRE link cable...

One of my 350XTW running without the white heads, because the same reason. This machine can running without these heads. I mean, I pulled out these heads. Some of minor settings necessary in SDS. I think you can do a test, if you pull-out the power cord of the first (W+V) head board. This...

I think, the Firewire link cable will be the problem. If you have the original yet, you need to replace it. This cause the similar problems 90 percent. (This communication cable connect the pci card and the head board.) This is a low cost cable and you can find at digiprint-supplies around 100...

Guys, I just wondering how like you this solution? Are there somebody who want to make this? Thanks, GregK

Hi Guys, Thank you for your kind interesting about my RMO Trolley! :) Here I show you, how can we doing the roll changes with this simple tool! You can found a complete step-by-step guide in the attached (downloadable) .pdf Basic Steps: It is also working good, with the UPPER rolls too...

Hey Guys, I have a good solution, if you have the following issues with handling your rolls on RMO.: - need 2 people to change a heavy or long roll, but only you are the one who works. :) - need to put the rolls (with bar) into other table to change the rolls on RMO bars. (sometime on to the...

Thanks, Sir! :) I bought Optiscout right now! It seems a very good software and good documentation! Wich version do you using?

Thanks! Finaly, I bought an used but "like a new" EOT-3 tool around 2.5K EUR. :)

Thank you, Sir! :) About inks: Currently we are running a special Spectra-head based UV ink in all of my Arizonas. This the same type ink using in EFI, VUTEK, GANDINNOVATIONS, etc... top machines. Perfect quality, European manufacturer. The price is less than a half of original. It have wider...

Hi Guys, (First, sorry for my grammar. Im not talented in languages..) Somebody asked me, Have I got any solution for extend the original inks expiring time. I remember that time, when I also got this problem with original inks. Sometimes when I buy this very expensive ink bags, it dispalys...

Really no problem! :) Thank you! :)

Thank you very mutch! :)

Thank you so mutch! ;) Let's see the ansvers... 1. The LED is around 8-9 WATT/sqcm, but I really never measured. Usually I use it at 50% power, what is more than enought... 2. Yes, of course. This is use the Arizona command signals to set the proper power. These are: Level 2(Minimum) =...

ok, I did. You can check the video and parameters in this forum: https://signs101.com/threads/oc%C3%A9-arizona-350-led.149990/

Hi Guys, I would like to show you our Arizona 350 XT LED based curing system. (because some of you interesed, and would like to see :)) Advantages: - Very Low energy consumption (Arizona eats only 3.2A total (on 230V) under printing on max power, (exclude vacuum pumps) - more than 10K hours...

Yes, this is good option if you mostly printing on the flatbed, and you have free capacity on roll. One of our machine is also doing this, but we using paper. Later, after the roll is over, is it possible to use the other side.. :) Also we doing pre-prints with 3 layer full density nozzle...