Search results

Current Postershop (except Postershop One) and Thrive contains the ICC-Profiler. Productionhouse is not available anymore (except as an update from a legacy Productionhouse licence). RIPCenter is the lowest edition of the Onyx RIP, with the lowest functionality. Could be that you can create...

Latest Builds of Onyx 18 to Onyx 22 are downloadable on www.onyxgfx.com. The latest builds should contain every latest patches for the version you want to use. You should not compare the version only, but the Builds too. I cant remember an open download area for patches. Only the driver files...

Could it be that something is wrong with the height sensor, and the head is too high?

You´re welcome. For printing with the spot colors, you need to design with the spot colors too. There are Summa Printer Tools available which will install color palettes into coreldraw and Illustrator. Flexi has a Color Palette for Summa by default (Swatch/Library/Summa). In addition, there are...

It is what I suspected: your sample is standard print quality. Can be improved slightly by using higher lpi, but not much. Check https://en.wikipedia.org/wiki/Halftone , this is your "issue". Inkjets does the same, but with a different method and smaller dots, so you do not perceive it the same...

Near the network port you will find an USB-Port. Put a downloaded firmware-file on an USB-Stick (nothing other than this file, the stick needs to be completely empty) and switch the printer off and on again (after a few seconds). It should start with an upgrade attempt. You will see the progress...

You know that the dithering of thermal transfer printers are different to inkjet printers? I do not know exactly what you mean with „white dots in the image“, but prints with 35 to 50 lines per inch will have a very „rough“ dithering, specially when printing CMYK instead of using spot color...

Are there really white dampers with transparent sides at an UV-Printer? Regularly a little bit air doesn‘t matter.

The name of the sensor is Opos, not Opus. If the head move to the left, will it reach the plastic guide which lowers the head, or will it stop without touching it? Could it be that you have removed the head for some reason, and have remounted it too low? If moving the head by hand (best with...

If you do standard cleanings, it will not pull much ink. Try powerful cleanings or Fill ink. In addition, you can open the cover and check the tubes if ink is running through them.

Sorry, no idea. If you can´t get one from a HP dealer, it will be difficult.

By the way: the printer is really outdated, not shure if the white ink upgrade is available new anymore. As far as I remember it have cost around 5000 to 6000 bucks.

The white ink option key looks similar, but is not the same as the ink chip. It needs to be set during upgrade one time into the slot of LC-ink, but then have to be removed. Do not buy a „used“ one. If one printer is upgraded with one chip, this chip is bound to that printer and will not...

No. It works job by job.

If the "sheets" are multiple different and identical jobs printed on a roll, the Summa OPOS BARCODE will help you automate that. The cutter will identify the cut jobs it needs automatically by reading a printed barcode, there are only a few buttons at the first job for starting the process. If...

If you cut sheets, perhaps multiple identical sheets, Summa has a sheet mode which will allow to cut multiple identical sheets easy and fast.

Should be on when opening the front cover. You can set it in the menu to always on, always off or automatic (on when opening the cover or start printing). Not shure about the position of that item in the menu (I think „settings“-submenu), but should be easy to find.

www.printfactory.cloud

@ Indecisive: If trying to send a cut file from Cutserver, with OPOS-CAM you have to start up Summa Cutter Control too because the driver of the camera is integrated in Summa Cutter Control (older S-Classes: camera control needs to be separately installed).

The PC600 do not have a network port. If you use some kind of print server you should give us the type or model otherwise no one could help you.