Search results

Thank you for the replies / input

like stated, biggest point is knowing if the glass has tint added or if the tint is in the glass. if the glass has the tint in it, scrap away and all is good. if the tint is applied to the glass, go slow pull at a 180* angle and try a small amount of heat on the vinyl ONLY if it does not pull

so when the end user / customers ask about life expectancy, how do you reply when the print media has a longer life and other brands all have a 2x life expectancy?

Looking to change our current wrap films to a more install friendly option ( less tack than the 3751 RA) Avery 1105EZRS Arlon SLX are the top on the list. Any input from current users? Also while researching the options, one of the points that none of suppliers can answer is why the...

a 1/2" thickness will be fine at that size and stay straight

Have not used this before but it it is a foam core with aluminum skin, so that is fairly common for interior usage. it depends on the thickness of the board, the thicker the material the more ridged it will be. How thick are you going to use?

This thread has digressed far enough for anyone that needs a refresher of what Signs101 is here here for Site Rules, Policies & Etiquette

have had this happen several times, and each time we send proof of it being received they always come up with a different version to the story. the one that really comes to is we made some RTA wall lettering, delivered and then upon delivery we Emailed the contact person with the delivery...

In you OP you state it is not worth wrapping. Simple logic concludes that you are doing sectional applications, and then using the attached image there appears to be no ghosting on/around the side rivets. therefore you are only using enough material to cover the ghosting. Which means you are...

since there are no buying a full wrap, does their budget allow for a full vinyl coverage? if you are looking for sectional, than all you need to run a few pieces horizontal, avoid the rivet and then apply their info as needed either way, sectional vinyl or sectional paint is going to leave...

that should be fine, what you are looking for is called SNAPTOGGLE some years ago we did acrylic panels that were 15.25"h x 85.25"w on 3/8" that was extended 12" away from the wall with 8 toggles per piece

Thanks for the heads up on other vendors While they are expecting to pay more for the custom cards, they also have a perceived value of these cards. So I'm trying too make sure that the cards are competing to what others sell custom for Sent from my SAMSUNG using Tapatalk

Customer brought in a business card that is 3 layers of 16pt paper, that has a custom die cut in layers 1 and 3. tried Silkcards.com, their prices are outside of the desired budget range. Are there any other vendors that does specialty Bus Cards?

Please make sure you fix the cut lines before reproducing

https://www.ramsonsimports.com/search.jhtm?keywords=plate

Learn something each and every day here is what we see from the specs we are given

there are a couple of MM here that do custom sizing / options for aluminum. Merritt Graphics FireSprint if you are looking for a vendor that supplies cut material Reece N Glantz or contact your local metal fab regarding the specs you list, I thought Ft Braggs was the largest in population...

since he is requesting a decal over a plate. that leads me to think he wants cheap. get a permanent adhesive thick vinyl or regular vinyl with a thick over-laminate. The thicker the material, the less chance of the texture showing through. just be aware, that this will also give more of an...