Search results

But, if the Pre-Owner has set the media adjustment value to any special value for any special application it could be helpful to check the media calibration value and set it to default (30) if neccessary.

Yes, simple OPOS Calibration will do the job too.

You can do a media calibration to have a look if the sensor works (will give an error if no contrast is sensed). Check first if the media calibration value is set to the default 30 . You can set a known value, or measure it.

Omega 2.6 is very old, could be that there is some trouble with new printer drivers.

Whats the problem exactly? Your problem description is like „my car is not running“, what can have any reason from „no fuel“ up to „motor exploded“. How do you create the cut contours? Do you print out of Flexi too? So much questions.

I currently dont have a versaworks installed, so I´m not shure where exactly to do that. There is a tab in the job properties with several machine settings like temperature of the heaters and so on, and anywhere there perhaps. But shure in the media manager, there you can change the setting in...

Have you set the scan interval in the software, or the printer? Could be that a software setting overwrite the printer setting.

There is a function Color Trap (as far as I remember, ma language is german) in the menu „Arrange“ or „Effects“. Cant have a look currently, here is late evening, Im in bed :-)

Flexi uses system fonts. It supports special fonts like Casfonts which needs to be installed separately, but regularly any font available in the OS can be used. Perhaps, there could be a problem with nearly 20 year old Flexi 6.6 files and font ids.

Try it out. I am a supporter, and had several issues when taping laminate on blank areas or printed areas, you will check a large difference (latex 300 and 500). Most of the time it doesn´t matter.

Unfortunately, laminate do not stick very good on latex printed areas, laminate can still easily be removed after weeks.

Have you tried to print with the konica on vinyl? Laserprinters regularly fix Toner with heat, could melt your vinyl and damage your printer.

Unfortunately, in the Spare Parts Guide, I do not find any picture of that area. But you will need a pin only who operates the micro switches. Should be easy to reproduce. Regularly, Summa uses Screws to do that.

There have to be a lever who operates that micro switches. It really looks like that this is broken. Perhaps tomorrow in office I could check what spare part do you need to repair it.

So sorry :) I feel old too … The FB is 100Mbit. Some 20 or more years ago, my company and others too around us have connected large format printers with crossover cables from separate NICs in the RIP-Server by standard, to keep the transmission of Gigabytes of print files save. Sometimes...

Macs do that since more than 20 years. The ports on modern switches do that too. The FB‘s who have a standard PC-Board internally wont do that, but wont need to if the computer does.

If the Printer is back online after rebooting, it is no issue with the IP adress. With direct connection, do you mean a crossover-cable? I would try to replace the ethernet cable. The position of the cable is a little bit difficult, could be easily hit by foot or can be easily damaged when...

The middle rollers are working with lower pressure than the outer rollers by default.

If the pinch rollers really lower (not only the noise, they physically lower), but the error message appears anyway, then it could be that there is a sensor problem. We had such a problem with the mentioned machine, but with that machine any sensor gives an error, so we have assumed that the...

Looks like sensor errors. Or the drive for the clamps. I had that similar at a customers machine, on a DC4. We have kicked that machine because it was too old and have delivered a new DC5. Summa Europe dont have much spare parts anymore, i was really lost during the first time when still...