Search results

We loaded our most commonly used media. Under 'Image Quality" menu down the bottom is an option 'Manual PrintHead Alignment' It prints a plot and you can do the alignment via the scale shown.

We were having this issue with the L700 ad it wasn't the print head at all. We got in out tech-spert and he advised us to do a manual calibration and suddenly awesome prints! Spent $1500 on replacing printheads that I probably didn't need to :(

Awesome thanks!!

We had this issue on our new Latex. In the end we had to do a manual calibration for the media. (after unnecessarily replacing printheads, countless alignments and cleans.) Fixed it and no more issue

Pretty sure you'd need to use non-slip laminate in public spaces like a school. Avery Dennison, MacTac and 3M 3645 all have these types of laminates

You could try the Oracal LT95 but like James said it may take off some off the fine styrene. The other thing is will it create enough of a mask if you are painting the polystyrene?

I always send my tiles as individuals and it doesn’t affect the numbering.

I Also only use an ethernet cable. Send from Illustrator direct to winplot, and also through Onyx for Print cut jobs. No problem

It happens on feeding the material using the machine advance and started with the first loading of a new roll of DryTac Retac150 The Avery3302 shown in my photos was new last month and we'd printed approx 35m from the roll without issue. I'm really at a loss. I've now re-ordered both rolls and...

Help! We have a HP700w Latex machine and while loading a couple of medias we are having issues with the media seperating from the backing paper on the right hand side. Medias affected - Avery MPI 3303 and DryTac R150 Retac It also happens during printing ruining the job. Anyone come across...

I use Oracal 8510RA with the Oratape LT95 app tape. No water required. Bubble free install and the app tape comes off easily as its low tack. Work so well for us.

Hi All Now my HP700W is all up and running, I'm keen to expand the product line into the Ultra Clear window graphics. I have printed on the above film before but it has been for promotional spots only and have removed the panels after 4-6 weeks. My question is - although the Data Sheet says 12...

Best tool I ever bought. Gets used the most!

I've also done this and so long as you have nice sharp lines to cut to, it is not noticeable.

I was almost sick watching that. So scared of heights - at least those heights!

Mazda 3GXS exactly the same issue.:(

Been there - done that :confused:

Just purchased the L700W myself. Would be interested in the costs per sq/m as I haven't yet worked it out or replaced any printheads etc. Mike from Origin Wallpapers has had the 800W for a while and had all the issues you mentioned about panels still occurring for him, but it's slowly being...

Found it - Veracruz

Hi team, Can you help with this font please? The designer is long gone and my client has new equipment.