Search results

interior / exterior what type of wood, what condition is it in, is paneling, clapboard, sheeting, etc. how is it finished painted, stained pictures would be helpful permanent with a full color design then you need to use a cast film with matching lamination

or 040 alum if you want a thinner profile, Would use the same adhesive combo unless physical fasteners are to be used

bump

Merritt company Or contact one of the other merchant members here Sent from my SAMSUNG using Tapatalk

thanks for the suggestions you make the full frame or you modify the existing frames?

the tension of the top roller is too tight and the other point is make sure that the lamination is centered on the roll and also make sure that the take up for the backing is in exact alignment to the lamination roll

Broker is looking for the heavy duty frames that won't bend when being hit. The frame they want are the ones where they have an impact stud on the corners that extend above the frame window area. Similar to the photo but they want the slide in version and also 2 riders Sent from my SAMSUNG...

We are not a merchant member here so I would suggest looking there first. If you still need assistance, send a PM and will help however possible Sent from my SAMSUNG using Tapatalk

try to be as consistent as possible, same strokes with the squeegee, same removal of the backing. that way when/if there is stretching it is at a similar rate while it is ideal to work climate controlled, but when that is not possible be aware of the angle of the sun. you can work vinyl in hot...

We have GraphixCalc Sign 3.1 with a multi user licence and are trying to get it implemented / running. As with any program we understand there are learning curves and changes from what is currently used. With that said, 1. when creating an estimate, you go through the different steps...

looking at their website, signvox was the initial program and has since been discontinued. The progrm has now been converted into shopvox

frosted vinyl will allow both sides to see shapes and movement but no details the window perf works with whichever side is brighter, so install on the inside with spotlights shinning onto it. See if that works Just remember that anything installed on the inside runs the risk of the dogs damaging it

Those are a very basic dual slider room ID sign, we make those on a regular bases before a vendor can suggested you need to know how the specs list the fabrication, Photopolymer, Acrylic or some other material FYI, that braille is incorrect for the numbers above it

those look custom, contact a local metal fabricator, if all of that is steel, shipping is going to get costly even with freight. have you tried SignComp - Extrusion Systems & Sign Kits or Howard Industries Wholesale Sign Manufacturing

https://www.gogsg.com/2325404/Product/Blockout-Banner-F16WHT-7425G;jsessionid=CF5FC0629D1B356348FC4ADE0F84C5DB SignWarehouse: Freedom Banner - 16oz - Low Price Guarantee there are others listed on the google search results

4over or zooprinting Both do craft paper and virtually all other forms of paper sizes and finishes Sent from my SAMSUNG using Tapatalk Depending on the amount of effort & time they want to invest these providers can also print the addresses

they are everywhere, focus on your reputation and ensure that what leaves your shop you are confident in and know it is the best you could do. We had (still have if the rumors are correct) a complete hack locally and this guy is a know scammer even before started doing signs. clipped one...

Exactly, what Vander says We print our vinyl with a zero margin, use the laminator to stick to the magnet and then hand cut a sharp blade with a straight edge.Very fast

The other point is why a banner? Yes I see that is what they want, but why? are they assuming this is the "cheapest" option? if this a one off project, use a removable vinyl and remove after it is done. faster install and no holes in the wall

Is this a once and done project or are they rotating banners through? the correct way would be to get a tension frame, much better end results on visual and for changing out the future graphics. What type of wall? drywall or is there anchor points(studs / solid supports)? we have had good...