Search results

Color Management I am not using any color management system between my monitor, Corel X-5 and my Roland SP-300 Not sure if ColorRip software has the swatches you are talking about. Jim

I am using Orcal 3640-G vinyl and ColorRip software and having problems with the color red just not looking vibrant. I am not sure if I am using the right profile which I found from the Orcal site for 3640-G Any one else using this vinyl use a different profile? I use CorelDraw X-5 and...

How to change red color in ColorRip software? I would like to change the red color to a deeper red and was wondering if anyone knew just how to do it. I am using Oracal 3640-G and while the profile I am using is decent I have the same problem others have with the reds being light colored which...

FrankW Thanks for your help and quick response. When I start my printer it shows the ink type as Eco Sol which is what the printer would have used in 2004 when it was new. I believe you are right about the printer not knowing which inks are being used. I will check the Dim switch setting's...

It may also be a USB cable that has gone bad I would try changing cable and USB ports before replacing parts on a mother board. Are you plugged into a USB port on a computer or into a USB port on a hub? USB Hubs go bad a lot !!! Try all the simple fixes before looking for larger problems. Jim

VanderJ Sorry I should have mentioned that I did power up in service mode and I did change the switch setting to exactly what you said but it still gives me the same error message. Does not recognize the ink sets!!! The original SP-300 came with Eco Sol inks but I have used Eco Sol Max inks...

SP-300 I converted my SP-300 to an SP-300V and back to an SP-300 for the following reasons. I have a new version of VersaWorks software and my problem is I am getting an error message when I start my SP-300v and the VersaWorks software that say's it cannot recognize my inks which are the Eco...

Thanks Gino it worked like a charm!! Thanks Jim

Gino My SP-300 uses ColorRip software. Should it work the same as VersaWorks software. I have all of the white letters outlined with the cut line color Magenta just not sure what setting to use simply to preform the cutting part. Do I need to hit print and cut or simply cut? Thanks Jim

This is something I have never used my SP-300 for in the past. Customer simply wants white number cut out with no line other then the Magenta cut line. I will then apply transfer paper. I have tried a few different settings with no luck so far. Would appreciate all help. Jim

Eco Sol Max 3 inks upgrade I see that when you order a New set of Eco Sol Max 3 inks from a Roland Dealer that there is a way to upgrade your printer without getting a tech involved to the New Eco Sol Max 3 inks Right now there is a list or printers that...

I just converted back to an SP-300 and Color Rip software Since I could not figure out the problems with the ink sets I just converted back to my SP-300 and Color Rip software which is working perfectly again. Until someone comes up with a solution for the Eco Sol ink problem or Roland adds...

Eco Sol Max 3 inks upgrade I see that when you order a New set of Eco Sol Max 3 inks from a Roland Dealer that there is a way to upgrade your printer without getting a tech involved to the New Eco Sol Max 3 inks Right now there is a list or printers that this is available from Roland for but...

VersaWorks CD The VersaWorks CD I received with the SP-300V was version 3.0 I just was not sure how the updates worked or if they honored an older version. Do I also need the drivers for windows 7 or do I just need to update VersaWorks? Thanks again for all the great help. Jim

Thanks for that information I was not sure the information I had was current for from a few years ago. Thanks Marsha & Tony Jim

A while back someone told me that when you purchase a used Roland printer to register it with Roland and then you can download a newer version of VersaWorks for it for free. Anyone know if this is true or not true? Thanks Jim

I have an SP-300V but I need the VersaCamm drivers for Windows 7 or 10 along with a copy of VersaWorks software. Thanks for your help. Jim

My question is will a Roland SP-300 support post scrip 3 or 2 when sending vector images to it? I am still using ColorRip software and Windows 7 if that makes any difference. Thanks Jim

Alps Printer Finding someone with an Alps Printer would make this project an easy one since Alps Printers use a ribbon style print system that uses white ink and it's also waterproof ink. I still have 3 or 4 old Alps Printers that had banding issues and I could not find anyone to repair them...

My favorite I like 3640 G for decals the best. Jim