Search results

this is a BIG RED FLAG!!! If the customer claim they have permission, then you have them sign a waiver stating as such and in this waiver they are solely responsible for any legal ramifications

yes, this material will allow light to come through, however you are mixing material and it will be seen in illumination value assuming this is going onto white substrate? if so you are better off printing onto clear as this will not add another layer that the light has to go through

do you have in writing about the yearly review? Are these reviews to discuss the amount of the raise or if you will get a raise? If these points are in writing then they are in breach of contract. If so then you have grounds for recourse, otherwise it is he said / she said scenario and you...

if it can interface with a PC, that would be awesome to do custom cutting of your contour shaping

depending on the window size, printed banners or colored PVC / corplast applying vinyl to the glass runs a VERY strong risk of it cracking

why do you need/want the outgoing jobs to be on a fancy rack? for us all outgoing are packaged up and cannot be seen. we waited and found some multitiered chrome plated wire shelves on sale and your all set.

have a customer looking to do a 48" w pole banner, Instead of having 2 24" pole banners on each side of the pole with the pole visible they want to have 1 large banner that goes over the pole and hides the pole. The other wrinkle is instead of angle or square tubing they want it to be out of...

o What is the price point compared to the other options? What supplier do you get it from?

to add on to the points already made. as soon as the order arrived and you saw it was faulty should have immediately been on the phone. The longer you wait to show there was an issue the more leverage the vendor has to claim you / end customer did it. Since there was plenty of space on the...

if you are proposing banner than visibility is not needed? static cling will work fine as a 24x24 size, it is just like all vinyl the more surface area the more adhesive to hold it photo-tex is a good option the semi-rigid with suction cups is a another good idea

if you are wanting to hide the hardware and have it easy to remove then a french cleat, granted this will damage the wall as there will be screw holes. the other way is to do a ceiling mount with cables.

it's becoming more and more of an issue. I can think of several recent sales that were either canceled once they tested the surface or pissed once they tried to place it on the truck and it fell off We have looked and so far there is no viable option to the aluminum trucks while maintaining the...

We are currently upgrading and would like to hear what others are using for their RAID configuration. at current, we are leaning towards a RAID Level 6 or RAID Level 10 does anyone use either of these RAID configurations? if so what is your opinion of it? we are setting up a QNAP...

with the bags, are they emptied by vacuum pull or gravity? Do you have to agitate the bag? how do they get agitated, squeeze the bag or take out of the machine and shake like the current cartridges

You are totally correct, it gets to the point where you almost want to stop during installations because of the hassles / time needed before the install ever starts on the simple projects like this one.

Bob is saying 18"w x 42"d the ratio we have always used isDig the hole so diameter of the hole is 3 times the width of the post (i.e., the hole for a 4” wood post should be about 12 inches wide). The depth of the hole should be 1/3-1/4 the post height above ground (i.e., a 6-foot tall would...

This is also what we do, saves a lot of time when installation happens since you are doing the entire door at once and not in strips

we have had done a fair amount of testing on this, especially for short term usage ( jumbo checks, time boards, etc...) ideally using the dry-erase lamination is best. HOWEVER, we found that Oracal 210 gloss, combined with vis-à-vis dry erase markers and the vis-à-vis cleaning fluid works very...

for a 1 color cast plotter vinyl, we would be $376 + installation. the installation is unknown because whenever a customer is supplying the material you had better verify that it is clean and ready for application of vinyl.

we use this method a lot, instead of plywood, we usually use a sheet of cor-plast since it is lighter and smoother surface for the future we are looking to get a full length rack that will take a 60" x 120" sheet of material