Search results

Next problem Thanks Bobby with the quick reply. After looking a little closer at the problem I noticed something I did not see the first time I looked everything over. The housing that lifts up under the heads had a space I could see through. A simple adjustment on that carriage to move it...

When going through the cleaning cycle there is ink coming out somewhere near the top nipple for the drain hose. At first I thought it was just the hope so I cut a piece off and put it back on but when I trying it again it's not the hose but somewhere near the nipple. My question is the pump is...

jwindsor One of my printers is a Roland FJ-540 which, of course, uses Colorip. I am using version 2.2 and have no problems running under either Windows 7 or 8. If you are not using ver 2.2, maybe the upgrade will allow you to get rid of that old XP computer. I am using ColorRip 2.2...

One other important think to keep in mind. I have an SP-300 that was New in late 2004 and it works perfectly and I really love this printer. When I upgraded my computer system I ran into one problem and that was I have always used ColorRip software and have never had any issues with it but...

We are always working on different ways of doing things. Trying different methods of doing things is always interesting and fun. We have a few more new products and the spray adhesive is just something of an a test case right now. Thanks Jim

Here is how we do it. We are now using a product called DRYTAC Facemount. We simply pull the optically clear material apart and put the decal in the middle. Now the decal as the Face Mount material on both sides and we then trim the edges and it's ready to mail. Now the back side of the vinyl...

Anyone know of a good optically clear adhesive spray that is also re-positionable that could be sprayed on the face of a vinyl decal for mounting to the inside of windows? The decals are between 3" and 5 " in size. We have them already made but now they want to for the inside or windows as...

Good question First step is to separate the two sides of the optically clear Facemount material The sticker is taken off it's backing material and applied to the adhesive side and then the clear front side of the Facemount material put on the face of the decal. Sounds complicated but it...

Drytac Facemount I have been using Drytac Facemount and it works perfectly. Only problem with the product is it comes 30" x 75 yards and larger. It is simply way more then we need for what we are doing. After checking a number of craft type stores and websites we found a product called Peel n...

I have some decals the are all about 4" x 5" and I want to mount them on the inside of the glass windows. I am looking for a double sided adhesive with a clear for the face side that does not need to be run through a lamination. I would prefer just a peel and stick product. I have been...

Gino The metal pan sounds like a better idea then plastic can. Funny thing is I had a newspaper I had been reading and I had put it in the garbage and that newspaper soaked up almost all the ink that leaked. I also have a carpet under my Roland and without that garbage can sitting there that...

I have always has a waste paper can placed right under my printer with the ink pump is located and this morning I found it with black ink in it. I always knew someday day if either the small hose or the pump itself let go it could be a mess. It's not a bad idea to place a small inexpensive...

Special Thanks for the tip. How simple can it get a piece of tape on each side did the trick and made a pain in the rear job easy. I should have thought of that but sometimes the simple solution is right in front of us. Jim Hill

Chafro I have a question for you. I was wondering if maybe the reason that some people get their DRYTAC Facemont with a grid on it is because they purchase it in rolls. Do you purchase yours in rolls or sheets? I have been taking your advice and trying to use my finger nails to separate the...

Crazy that some get it with a grid and others do not. Please see the attached photo of what I received from DRYTAC in 8 x 10 sheets. See attachment

Pat White The sample that I was sent from DRYTAC say's PSF Facemount and that's all there is. There is no grid printed on the front. Maybe I have the wrong material because the only thing it say's is DRYTAC PSF Facemont. Since the material is pressure sensitive what type of laminator should...

Facemount tutorial I would like to hear from anyone who is using Facemount or has used it as to how they applied it. Do you use a roller laminator or just use something like the Big Squeegee or even just a small squeegee? Another question is how do peel it apart. I have tried the exacto knife...

Test Print Go slowly setting up the printer and follow the manual and do everything it say's. Once you get to the point where you can do a test print that will tell you a great deal about the condition of your printer. Once you have a test print post the results so this site and then others...

I received my FREE sample pack of two 8 x10 sheets of Facemount but there were no instructions on how to use it. Is there a certain temperature to reach to activate the adhesive when using a roller laminator with this product? Would like to hear from anyone who has used this product to get...

All of the stickers I make under 5" in size. I only need a laminator big enough for thinks 5" x 3" I am not in the traditional sign business and I really do not look for that type of work. When people contact me about banners or signs I send them to a good friend of mine that has a full scale...