Search results

That’s exactly what I was thinking. The slant and stagger needs adjusted by a good technician. If fees compensation can be dialed in on either head. It not both at the same time, there is a positional issue with the head itself. Sent from my iPhone using Tapatalk

Hard to say with this source image. Get some really good “known” art to work with to get a better baseline. Sent from my iPhone using Tapatalk

It will be fine. Auto mark is a calendared film and your lam will be a calendared film as well. You can put cast lam on calendared but you can’t put calendared on cast. The lam will shrink and pull up the vinyl. Sent from my iPhone using Tapatalk

They have been this way ever since I have been dealing with them. I usually know what the price is what I want from somewhere else and when I call them, I ask what they can do. If it’s close, I let it go. If it’s too high, I give them the price of the competitor. In some cases, they are paying...

Contact Ernie vivieros. He knows his stuff. His company is InkjetLife. 508-828-8032 Sent from my iPhone using Tapatalk

Do yourself a favor and order the circuit board from Ink Control. It is a billion times better than dealing with the chips. I was fighting with permanent chips and 1 use chips and things and it was a huge pain. Ink control will emulate whatever ink set you want and make the printer work. Also...

Nice! I had considered one I these for our shop but I’m in the same boat as you about the pressure to keep the machine full of jobs. I am debating pulling the trigger on a Digitech flatbed soon at a cost of $250k. Scary but I’m sure that once I get it, I’ll wonder ho I ever loved without it...

If you print any vinyl with solvent and don’t let it outgas long enough before cutting, it will curl right off the backing paper. The higher the ink load, the worse it will be. I have even seen this happen with high ink loads of latex. No problems with UV cure inks. If you let it outgas long...

My Kongsberg cutter has camera registration. All I have to have is a minimum of 2-1/4” dots to do a location registration. If I set the software to compensation, I need more dots most likely ( I usually have several throughout the art or at least along all 4 sides of the art) I can put the the...

There is one in the front and 1 on the back. Sent from my iPhone using Tapatalk

Your emergency safety is pushed in. Twist to reset it. Sent from my iPhone using Tapatalk

You may be in for a meeting head if it has been sitting that long. I would put cleaning solution in it and have it soak overnight. The trick is to start it for 99 minutes and then switch it off once it starts counting down. I would attempt a few ink fills as well as different levels of cleaning...

Don’t expect it to be fully opaque. It doesn’t need to be.once you get a decent layer on there and put it on somethjng, it will look great. Sent from my iPhone using Tapatalk

There is a plug-in included with the UCJV called finecut that works directly with Corel or illustrator but isn’t necessary for regular print and cut. All you need to do make a color as a spot color and name it “CutContour” with no quotes. It must have the capital C in it and be 1 word...

Leave the Rolands alone. Their newest flatbed is a rebadged Ricoh. The older rolands are good print quality but super slow. HP R series is super overpriced and one of the most expensive for inks/consumables per sq ft. Depending on budget, the best, in my opinion from seeing the machines in...

Theoretically it could work but if you have never used a big squeegee before, I anticipate you getting a lot of wrinkles. What you need to do is go to bigsqueegee.com and get a big squeegee. They have the kinks worked out on these things. They also have links to a ton of videos that show how to...

I own 7 printers as we are a trade printer only. I continue to study the printers as they come out so I’m prepared when we have to buy another machine. Every salesman that lives will tell you what you need to hear in order to put food on the table at home. That’s what they do. I was in the...

That actually happened to me a couple months ago when I went looking for rip computer specs. Searched the web, saw a link with the exact question I had and sure enough, I was the OP from years ago. At least the answers I saw on there were exactly what I. Ended this time as well. Getting too old...

I don’t know if summa will read the marks on it’s own if you place them in the file but we have the same issue with it for running our Kongsberg. I manually place registration at the top and bottom of the sheet. I made a template in illustrator with my cut lines and registration so our staff can...

To give you a flat reply to your question, Roland and Mimaki are your choices for an all-in-one. Roland is much more expensive without the benefits. The Mimaki will run forever. I know people who still have jv3 printers running every day. If you want quality and don’t care how long it takes, run...