Search results

Any numbers supplied to you by a communist government need to be multiplied or divided by at least a factor of 10 before your even in the same zip code of actual truth.

They are very similar machines, I ran both a decade ago, and if you had forced me to pick one to keep, and one to blow up with dynamite, I would have kept the 7000.

Looks like Scooter Board to me. https://woodcraftmanufacturing.com/board-products/scooter-board/ I used it many years ago, would not recommend it for any outdoor applications.

What about the possibility of shipping damage? I've seen similar deformations in rolls of vinyl and laminate occasionally and just assumed UPS or FedEx had their way with it the night before.

Orafol 3951 HT should work for this application. The more important question is what type of resin are you using for doming? If you use epoxy, try a polyurethane resin as it's far more flexible.

Turn the power on, wait for the Summa logo to come on the screen, then touch and hold the bottom left corner of the screen.

The tried and true Scotch tape over the crop mark works for most situations. Under the OPOS menu there is a Media Calibration option, might want to give that a go. Keep track of your current setting, 30 is default I believe.

Right-click the tab for your cutter in PM, then select 'Start Barcode Server', now go to the Summa and place the blade about 1/2" below the center of the barcode, then on the cutter display hit Action, then Scan Barcode. Then you sit back and smile when you realize that you will never have to...

I'm currently running 21, it has the exact same issues that 19 had as far as CAM machines are concerned.

CAM units require USB.....You can ignore the error message it's a false flag. Try using PM as your barcode server, Cutter Control must be open in the background, verify your camera is getting a picture(Actions/Camera Control) and you should be good to go. The CAM machines can be finicky, I feel...

GF242 will be extremely similar to the Briteline.

https://badgerplug.com/

Oh Snap!! Did they finally find bamboo in those Arizona ballots?

Not true. https://www.factcheck.org/2021/08/instagram-post-wrong-on-u-s-casualties-in-afghanistan/ https://en.wikipedia.org/wiki/United_States_military_casualties_in_the_War_in_Afghanistan

I have seen this, long story short...make sure your print profiles are dialed in and not laying too much ink and let it dry two or three days before cutting/doming.

I've ran HP Latex, and numerous brands of solvent machines and the Colorado is by far the best banner printer I have seen, miles better. I run FlexJet 13 oz. on the "GLPSA 13oz Forward Banner 356-US1812" profile with great results.

Mac-Tac Rebel HT or Avery 2127 HT, both stick to just about anything.

It's Brents fault. The printer is reporting to Onyx that it has no media loaded. A good first step may be to reboot/restart everthing.

Did you try using "Cut File" in Cutter Control? Just type in the first six digits of the barcode and it will auto-complete, hit send, and it will just start scanning crop-marks and ignore the barcode.

Epson is contracted with a company named Decision One for warranty service calls. You call Epson and then they have D1 contact you to arrange service. The D1 techs up here are excellent.