Search results

garage door installers use a lot of this steel angle with holes........make any angle you want to.... http://www.lkgoodwin.com/more_info/slotted_angle/slotted_angle.shtml

3/8" steel cable???? or 3/8 rope? i can tell ya real quick the steel cable that size is what is on most truck wenchs))))) I have 2 steel cables holding up my 8' X 24' loft in my garage. each 1/4" cable is rated at 2000 pounds. http://www.engineeringtoolbox.com/wire-rope-strength-d_1518.html...

canonsburg has one of the best sign painters/pin striper around.....bill beckner.......i worked at the NAPA store there. if your a car guy, its the home of YENKO CHEVY..... penowa is famous for having the place of the oldest humans in north...

BURGETTSTOWN, is the high school i went to. live closer to AVELLA, in a little town called PENOWA. familiar with morgantown as i went to PENN STATE fayette campus.........couple years.

I CLAIM the "burgh" as home. grew up 30 miles southwest of it. prettiest country you will find.

the one thing most are not addressing is ........ MOST TOW VEHICLE LETTERING....... has to conform to STATE REQUIREMENTS....... that is where you need to start. most states have enforceable rules about size, and visibility. and the tow truck people KNOW THIS...they should provide you with...

i have done a ton of WRECKERS/TOW TRUCKS............... AND not many of em with a SCRIPT!!!! i did 10-15 for this guy had 8 other tow truck companies..........and iam the guy that caused them to outlaw magnetics for tow trucks............i had one guy had 3 tow companies, with truck lettered...

one of the best cash songs....... https://www.youtube.com/watch?v=rWHniL8MyMM

if i remember when i got the decoder........IT IS A BIT OF A INSERT AND HOPE its connected...at 1st mine did what yours is doin. seemed like you have hold your tongue just right when you connect the decoder to the board....its a sloppy fit, and if you hit it.......LEAVE IT..........on mine i...

you sound like my 3 ex wives))))

just saw the post......9 pm 2/26/15. i was gona suggest the removing the top, make sure the travel strip that follows the cutter head is not cut or bruised. cleanin it up should help but dont go nust with any lubrcation.... as for your connection.........all my rolands have run on a PRINTER...

I SAID FOR MY NEEDS...........i prefer to make em as i need them. if i want to change something i can......as for ink, i have a HP K 850, with a CIS bulk ink setup. $29.00 for 4- 4 oz bottles of ink)))) so my cost is minimal 200 cards....is bout 6 months worth.....as iam not bustin the hump and...

i love it when people dont know what they are talking about..BUT ASSUME.......... FYI..........................AVERY MAKES A BUSINESS CARD STOCK called CLEAN EDGE))))) the old perforated looking edges are GONE)))) here are all of em...

if you are just going to do YOUR OWN.......cost and efficiency wise, you are better off going to OFFICE DEPOT...getting packs of already preferated card stock. can get glossy single side, or no-glossy print on both sides......AVERY # 8871 use 8873 label template in corel. it will print 10 card...

to load a NEW HARD DRIVE..... 1. LOAD THE OPERATING SYSTEM. 2.LOAD AVAST, or a virus program. 3. as for those programs you mentioned.....dont much matter as they will load independently of the others. 4. fonts need to stay in windows.......so ALL PROGRAMS CAN ACCESS THEM. keep the total...

now i will say i have cut a poop load of "bowties" "blue ovals" RAM & VIPERS... the word Chevrolet, mustang, ford, and many others........i have built my own, NICKEY chevrolet, BALDWIN motion, YENKO chevy......and these you cant buy.........many gas TEXECO, SINCLAIR, GULF, ESSO, logos....but...

MOST OF THESE........ it is better to BUY THEM already made.........try cuttin a trans am firebird))))

YOU ARE RIGHT........... When plastic is molded, they usually spray the mold with silicone. So it's on the plastic when it's removed from the mold. ALCOHOL ALONE....... will not remove it!!!!! waste of time.............. UNTIL YOU HEAT the plastic/poly.......the silicone is sorta embedded...

ive run into that with baseball head gear. also construction hard hats. seems there is some kinda stuff they use in the molds like PAM, so the hats will not stick to the mold. this gets sorta imbedded in the hat. if its just a one time item, get a propane hand torch, ON LOW FLAME.... and heat...

DOES THE UNION HAVE...... sign installers as clients? if not.......then nobody would have a problem. and you being in MAINE....... which is a right to work state.........i never had problems with unions when i lived there and i was in the building trades.........in arrostook county))))