Search results

PhotoTex is very good wall material, we like the higher adhesive version. if there is no concern with paint / wall damage then any good vinyl will work. you say the wall & paint are in good condition, how old is the paint? newer paints have added compounds that reduce the amount of staining...

there is no set template, each vehicle is a different size and shape. You have to look at the vehicle and decide what is best, keeping in mind the printers capabilities and the installers knowledge / experience there are a couple of guidelines to follow Most wrap vinyl & laminate comes in...

it looks like an illuminated cabinet frame, is that the case? if it is backlit, then yes strip the material off or do a new panel. If it is NON-illuminated then reface it, take a piece of opaque white vinyl cover the section up and then lay the blue lettering. This will be the fastest and from...

+1

make a salt water solution and put a piece of printed banner in it. I can't think of a reason why short term would be affected. just make sure you keep it clean when not in use ( fresh water and dry before rolling up)

https://www.inkydeals.com/deal/294-commercial-use-fonts/

If you want people to be aware of what you do, put your company name so they can contact you. Otherwise just use a WOW design that you really like, this should catch their attention

when soaking the head, we found doing multiple soaks is ideal. example you had black missing about 29 nozzles on one of our VS 640, let it soak for about 36 hrs. did a powerful cleaning then printed some test samples did another 36 hour soak and another powerful cleaning and the nozzles came back

Sanmar.com, next day shipping S&S active wear, next day shipping

nice to know that you can do custom prints, how do you account for distortion to the shape of the item? example a motorcycle gas tank. also this thread is 3 years old and the OP is no longer here before you can offer your services you need to get a MM account.

+1,

:U Rock::toasting:

Need some insight to the font classification Thank you

we have tried the 7054, 7055 & 7065 the 7065 is much better than the others, and we still use it. however it is black and the other 2 are clear, so you have to be careful on where / how you use it. the 7054 & 7055 do NOT like acrylic, all the other surfaces we have tried works decent, but it...

SHOPBOT is where you need to start looking, they have an extensive online support system and good machine to start off with

without a white ink base the print will always appear to be washed out.

I would think 48 x 96 surface area as that is the most common substrate size. personally we would be looking at a 60 x 120 size @ Z SIGNS the picture you posted, seems like there are voids in the lighting. Is that the case? is there room to add lighting?

mind telling which company you used? the longer runs are for wraps, be it vehicles / walls / etc... thanks

we have seen this before and it usually is caused by the cut contour being an incomplete circuit. if you go into the design zoom in and trace the lines, there will probably a missing node also just to make sure the top layer is the cut contour color and you are not flattening the file during...