Search results

Update: just did a test mode fill pattern print and it is the Light Cyan that is causing the issue. So my next question is where to get a print head and what other items are best replaced with the head replacement?

after cleaning the encoder strip, there is still over-spray. What is the best way to access and clean the sensor? also noticed that the cyan is "dripping" excessive ink when the carriage comes to a stop while traveling, see image The machine is a VS 640 running CMYKlMlC Waiting on the...

This just be aware that Signs2trade does NOT hem the vertical edges. they do double stitch the top/bottom pole pockets

At first we thought it was a flux in the weather but only the Cyan colors are showing the over-spray. Also this is happening on all medias being used, regardless of the head height or the amount of the ink being applied. As the photo shows it is only happening with the Cyan color. After doing a...

typically these are tubular plastic extrusions which are inserted into any type of chain link fence and woven through the links. if you are going to start with a solid sheet and then cut it down, you will have to have have a flexible substrate. maybe PVC or Sintra

http://www.georgiaprintco.com/

IJ35 is intended other usage, specifically short term smooth surface. Have you done a test stick to see if the material will stick to this wall? assuming you are wanting to keep the edges free from a visual adhesive, then you can also look at Primer 94, otherwise you can take a strip of...

+1 The OP mentioned going "quirky" event sensei

:help you mean those totally custom products are priced differently from the 18 x 24 cor-plast yard signs that say "for sale"........ what a novelty idea LOL :ROFLMAO: we have changed our policies due to a couple of "these" customers

just got off the phone with them, very helpful Thank you!!! :rock-n-roll: got several of those projects sitting on my desk where you try to make the design into reality, at least nothing is boring :smile:

+1

open to any comments

Friday BUMP

http://www.4everproducts.com/products/street-signs/ http://www.metalcraftindustries.net/index.aspx

We received this today

bump

http://www.digitaltrends.com/cool-tech/electroloom-clothing-printer/ as it has been said many times before, life is turning digital

Just like with signs there is a forum for garments / T-shirts http://www.t-shirtforums.com/ we have had good success with http://www.imprintables.com/printable-heat-transfer-vinyl-spectra-eco-print

who knows which supplier carries these type of frames? the intended sign is approx 18"w

what did it to to the brushed aluminum surface? what RPM do you run yours at?