Search results

in addition to the methods listed above we like to use a very thin diamond wire saw between wooden dowel handle grips

not sure what you are asking I am guessing you are referring to a "broker" this person deals with the customer and has the product produced by another company and sells it as their work

a couple of 54" Dale is very informative and great to work with

my understanding when we ordered was the handle was an extra charge

yup perfectly fine, we have done a fair amount of restaurant's bars and table tops with vinyl then seal it with clear resin

http://www.jdsindustries.com/homepage.htm http://www.bestblanks.com/ http://www.conde.com/

you can use your current design and add cable rigging from the upright "blue" supports to the railing around the trailer. This will eliminate the wind gusts

grimco for stock http://www.ccengraving.net/ for custom

tape off the desired width and paint the gap

you are wanting 7' to be extended out from the buildings facade, regardless of the weight that is A LOT of pressure being placed on the bottom edge which is only 6" w if the drawing is to scale then there will be a fare amount of wind drag from the sides, and the mounting plate is only 6" w...

seeing some major red flags with what you are trying to do. to fit within your criteria add a cable from the signs outer point to a higher spot on the wall depending on how far the roofs edge is make a bracket and "hang" the sign

and that is the bottom line, if they are happy, continue to use you for services/products and pay their bills on time then all is win

pictures would help. if you can remove the hardware that will make it easier otherwise you will be making lots of cutting to get it behind the door hardware

http://www.signs101.com/forums/showthread.php?109363-Enough-is-enough-already&highlight=magnum+magnets this is well documented issue with Magnum

welcome aboard, youtube will be your best friend to learn how to use your new printer

the recent polls / stats are to be true, then HP latex is the clear winner. again like Gino said it comes down to what you are most comfortable with as that will be the ensure you are up and running smoothly and quickly

have not tried it with Avery, Oracal/Orafol distinctly says DO NOT use primer 94 with their vinyls

dc to ac power inverter & battery charging station- nothing worse than getting to a site and realizing the batteries were not recharged or you have drained the battery faster than expected. mechanical fasteners - screws, bolts & nuts, etc...

has anyone state side used this supplier? good bad indifferent?

same principal different container. What a sealed cartridge has is a predetermined print amount coded onto the chip set, this method uses the chip and does not use the weight to determine when the cartridge is empty.