Search results

Print heads Did you pull the dampers and try to gently push some cleaning fluid through with a syringe? You can also try to put a piece of non lint cloth in the capping station, soak it with cleaning fluid and place the head back over it for a hour or two all else fails I have them at $750...

Oracal If the vendor in question is an Oracal dealer, report him to Oracal. My contarct with them requires we do no production work.

11 10 call grimco and see if they will warranty the inks, they did buy the rights to 11-10 which I understand is made by NAZDAR who is still around. Before doing anything I would check the shot count on your heads, if they are over the expected life no one is going to cover it.

Pc 600 If you can find an old copy of flexi print cut Pro 6 or newer it will solve all your problems

Roland print heads We have them at $750.00 here in Colorado www.solventinkjet.com

Pumps I have those pumps if you need them $45.00 800-328-1306

Gravity Any way to adjust where the carts are in relationship to the print head. Moving the bulk system up and down can change the way the ink flows to the heads.

Mutoh Is it a Falcon? If so check to see if the sponges inthe capping station are puffed up. This will cause the inks to migrate into the dampers.

Dampers & cap tops I have those parts on my site www.solventinkjet.com we supply service manuals free with your first order

head rank How many lines is the head rank? Try putting in the old one and see if the printer will take it. If it does the head rank my not be right for that printer or you are mixing up a number for a letter

Tech The tech manual won't do you any good, as I recall it will only show the pump and how to replace it, not how to take it apart. I have them at www.solventinkjet.com

Capping station If you just want to change out the capping station I have them at www.solventinkjet.com I also sell the pump tube if you want to rebuild the pump

Caps Falcon outdoor There are two kinds of those caps, aqueous and solvent. I sell the solvent one for the Falcon at 130.00, 79.95 for the JR www.solventinkjet.com Switching to roland inks won't help, Epson or an Epson supplier makes all those inks

Pads Are you running a falcon or falcon Jr

Mutoh How old is the printer? You may not be getting a good seal from the cap top on the maintenance station.

Pc 600 Check to see if you have it set on Sheet in the menu. If it is the printer will try to find how long your media is by running it forward

DX 5 heads Yes it is the DX5 head, which is kind of a generic name because Epson has a whole list of DX5 heads with different part numbers. What makes the Mimaki and Mutoh one different is that you need to make sure that you get a solvent resistant one. Bad heads will blow fuses on boards but...

Mimaki Print heads I have the Epson Solvent print heads for the Mimaki JV3 My heads are in Roland packaging but Mimaki and Roland use the same Epson heads. The Roland heads do not include the long metal mounting bracket Mimaki uses, so you have to use the old one. Ship out of Denver Colorado...

stripes try adjusting the media feed rate

Sponges If they are dried out chances are your station is shot. All the sponges do is keep ink from splashing back on the head when the pump is pulling down ink. So pull the sponges and see if the station draws down ink. If the sponges are puffing up, well that maybe an issue with the inks that...