Search results

Print heads I have them at www.solventinkjet.com, but before getting new ones get a mirror and look at the head to see if it is damaged. You may just have dried ink on the head We also include free tech manuals Ships out of Denver

Pipes Take the ink line off at the damper, throw the damper away and get a new on. Install a cleaning cartridge, get a large syringe and hook it to the onk line and start pulling fluid through the line. Once that is running clear, hook the syringe (get some soft tubing to connect to the syringe...

1304 I have them at www.solventinkjet.com

hose I have it, it is a clear solvent resistant hose designed for PERISTALIC pumps (pumps that compress the tube to get the ink to flow) you can buy it for one dollar a foot at www.solventinkjet.com

Tech I have one, but it is 15 meg. Shoot me your email

Dampers Did you change the dampers and cap top?

Print feed look for the print feed adjustment (PF) in your menu. you can fix the problem there

Pumps Look for the two tubes that come out of the bottom of the maint station, there is a connection there where they feed to the waste bottle. That plastic connector has a very small inside diameter that may have dried ink in it. You need thin wire or a pin to clean it out. As mentioned above...

Print head take a look at the post from Luggnut, cleaning is explained there. I have heads and instructions if you do decide to change the head. cx out www.solventinkjet.com for more info

Cap top You can test the cap top first if you like. There are two small black tubes that come off the bottom of the cap. Pull them off where they connect to the pump. Plug one and put a syringe on the other (either one) and pull to see if ink draws down. Any air in the draw will tell you the...

1604 Last one I sold went for 10K We installed a new print head and maint station. New 1614's are now 19k list, 1304 are now 14K list Make sure you see a print come off the machine before you buy and pick it up. I had a customer today who bought a JV3 and it showed up needing new heads.

That head I am with Artbot. check that the pump is pulling down from the cap. Fill the cyan cap with cleaning fluid and cycle the pump. watch to see if it pulls it into the waste bottle. Next do a clean and see if cyan is pulled down. if cyan does not come down you may need to replace the...

Tech of Choice Try Dave Mee at 617-308-9561. I am not sure he works on the UV printers, he is very experienced on the Mimaki Solvent printers

Don't shake Hold it in your hand and tilt it back and forth a few times is how we were told in tech school

Mutoh Go with the Mutoh. If HP/Seiko needs all new heads and caps you will be looking at around 9k in parts

5 years Check in the service mode to see how many fires that head has made, it looks worn out. I have the manual if you need one

Print head If you want one local we ship out Denver Colorado www.solventinkjet.com $750.00 & free tech support on the install

Piece Piece will run the matreial forward looking for the back edge to give you your available print area

Capping station Does the capping station drain when you put cleaning solution in it. I had a printer that had dried ink in the line to the pump so even the new cap didn't help. Squeeze the tubes and if they are hard you have to clear them out

Heads Ok, let me know if you need a head