Search results

yes 0266 and step over all and changed to mA version so you can use original inks. best regards wunder

01100002 means: LVDS Error on Head Board (LVDS Lost Lock) 01100005 means: LVDS Error on Head Board (LVDS Register Access Error) 1st Step check the RAM....you can use one 512MB or 2 pcs 256MB......if you have 1GB Ram you can use too but on start become error ram message ...ignore that all works...

you need a second code. this entered befor normal service code. hope i remember it right left, right, up, down,right,down,left than the normal service code ! hope is right..long time to do. roland not my favorit toy :notworthy: best regards wunder

Hello, a friend has a mimaki 250sp and his Mainboard is electrical damage. So he become a new board from an Mimaki 75sp. the new Board is switched to 250sp but theres so many settings there wrong. Have anybody a parameter/settings backup from an 250sp ? best regards wunder

Check you INk-Pump for correctly working and check the cap top for vaccum leak must be check with syring " see writing from anozira02 " this is all you must do and all fine :rock-n-roll: regards wunder

The Blank Metal cap tops used by Machines like True Solvent (mimaki S/SP-Series or Mutoh Spitfire) a.s.o. but he has no effect to the working as Cap Top with Sponge. You can use both !!! Printhead surface never touch metall or sponge this is impossible:toasting: best regards wunder

you can not use tygon for the INk-Pump the standard is to hard otherwise you kill the Pumpmotor. you must use SOFT Tube for it...is a specialy one for INK-PUMPS only.......i have only a german distribution for it and they cost 12,-€ per meter. regards wunder

YES HP do all about for his Latex User :ROFLMAO: The Warranty Rules for the Printhead, now by 1200ml flow......there is a joke ?!? :rock-n-roll: This is once again a testament to their half truths:notworthy: ONLY FOR ME !!!! ...is the HP-LATEX a very BIG deception to the customer.....will...

Welcome from Germany/NRW:toasting:

20cents is not the real cost for a sqm. the Price is minimum 4-5 times higher...to calculate is not the ink price important.....$120,- or $130,- do nothing else.... 20cent sqm is only feasible with a solvent based Printer. The 20cent sqm Latex Price is a big lie from HP or the user they can´t...

Change the settings in Spitting Menue "i think is set to ON MEDIA" Change it to <Origin> and all fine regards wunder

I`m not a triangle fan....we have different customer they use there Inks on various machines....like RHII, MImaki JV-SERIES and all have from time to time with different charge of Inks trouble. Heads clogging, Drying Problems cant print with full speed a.s.o. so we change the Inks to...

0901388 FRM,BRD,UV_LAMP,CNTRL,L UV Lamp electronics board located inside the main electronics box (secured to the right side when facing an open electronics assembly) if you like to repair it you can send it to Blue-Mall(dot)com Germany regards wunder New one ~400-500€

we have a client with same problem....nothing helps "all profiles a.s.o used/tested no changes" Printing no colorful red "Magenta 100% + Yellow 100% output dirty pale red :banghead: Firmware 1.09 check to update to the newest Firmware version. regards wunder

check the UV Control-Board this cant be communicate with the UV-Box. The Controlboard is inside the E-Box "place in the Middle, left to the mainboard" regards wunder

go to menue setup, select Print cleaning and set OFF :rock-n-roll: thats it best regards wunder

this is the normal period for service and the parts changed befor errors occur....to change the parts after error is stupid thing :banghead: be sure the damper brings problems after normal lifetime a.s.o.... Change the parts and you printer will thank you with a good printing result. Many...

long year to used the sc1400D but you have the wrong Interpreter in settings use the mutoh GL not HPGL ! But i must say the 1400d is a **** machine and the firmware has a mega bug...our machine goes direct to Mutoh Belgium and comes back with same result and cant be repair from mutoh so they...

change the Printheads ! there is to many deflections on it to solve your problem !!! And the best way to use the NEW Valve DAMPER and not the original !!! and i think your printheads totally dirty ...clean it from the printingside ! regards wunder

check your pinchroller and control the adjust platen A&B temp..this trouble i have often see by use monomeric vinyl and eco solvent ink. But is right to check the encoder stripe/sensor..... regards wunder