Search results

Basically, this, just as Colorado explained it. Except I'm at $117.50 per cart. 2 machines churning away, with custom ink limits. VERY rarely do we get something we cant hit first time.

Buying inks direct from Nazdar. You should be able to get good color. Did you check the jeti setup, that the head setting matches your installed heads (se/ sm) and are both banks of your heads firing properly? When we get weak color it's usually a gremlin changed the head type setting or a bank...

What inks are you running? No vibrancy issues here at all with the nazdar inks. When you profiled, what were your ink sliders set at on the jeti gui? We like to start at 200% on there. In jeti setup are you configured to the right size heads?

how about trisolve paper, strip of banner tape at top and 2 tabs in the bottom corner. Roll bottom up it makes install a breeze. we do a lot of these works really well-and just about anyone can install them

Printer spends $250k on bangin' printer. Can't (or is unwilling to) print CMYK files. ------->Priceless!

Went from 3 seats of cs4 to 3 of cs6. A little odd at first, but now I'm really digging it. My coworkers not so much yet. The 64bit speed increase is really dramatic on opening, saving, and resizing. Don't care for the pricing model but the time saving tools make up for that.

We're not in Chicago, but we can and do ship there, and we do print 10mm coro. Just in case you can't find a local source.

Nice that it appears to me that it's a sign supply distributor no less. Love this business!

PM sent - non MM referral

If you need a vendor, we print them all of the time. Give a shout. thx Rick

Agreed. Eric is the man. Thank you!

Check your local electrical supply house......or mcmaster carr. Google image "beam clamp strut" there are a bunch of varieties

Gino's first post is spot on. But, Mosh is also right. It's probably not going to end with the sit down. You have a lot to loose should it go down hard a second time.

Bret - PM sent - local non merchant link

Down in my end of the state, a guy was caught pumping the sap in someone's gravity feed tank. It wasn't pretty. I was told (uniformed) law enforcement wasn't even needed. What's that debate about carry states?

Good morning. Thanks Fresh for the props. Happy to help any member with their trade printing needs. We're not infallible either, but I believe our pass modes are higher than other trade printers which yields a better print quality for your customers. We're about a buck a sign more, but that's...

The proper way to do it it to print your job with a 1/2" overlap, then trim off the white margin on your table, (trim a 1/16 or so into the print so you have no white at all remaining, it makes perfect alignment easier on the installer). Put the wallpaper up, using your overlap for alignment...

24 heads in one bank? did you swap any of those heads to a different position? Ink temp issue in reservoirs? Clogged osmosis filter in reservoir/lung that needs backwashing? What ink are you using?

Agree with COlorado. Depending on mileage, I'll take one as well. Please send over the printer information pages. rick@typestries.com thx Rick

Try cleaning them with LA's Awesome from the dollar store. Spray on, let sit, scrub with a damp scrub brush, rinse. You might just be thanking me. Next step would be Cleaning detail from CRC if the awesome does not get it.