Search results

Be shure to set both printer and computer IP's in the same IP-Subnet (first three numbers the same). Specially after replacing routers, it often happens that the routers DHCP-Server sets the PC to another Subnet dynamically while the printers IP is mostly fixed and so stay in the old subnet.

True Shape nesting is a very useful tool not mainly for designing, but for production, for example to safe a maximum amount of media during cutting, printing and routing. What is shown in this thread is just a side effect. Flexi is not only a design software, but a production tool. Buying this...

I suggest to save settings in the preferences manager (you will find it in the Flexi-program-menu in the windows start menu). So they can be recovered in seconds when problems appearing. For some releases, the latex-drivers are optional. So it could be that you have a separate option...

The licence is not written to the dongle, so nothing will happen what could avoid using Flexi 8 and Flexi 10. The licence results from the combination of licence number (written to the dongle during production) and installation password (set to the software during installation). Doing support...

No. The only "contemporary" way to use this font format would be Flexi.

This problem happens when something is wrong with the capping station, ink tubes from capping station to the pump or the pump itself. It happens when ink is remaining in that components after cleaning, what creates a slight suction.

The bowing compensation only works with S-Class (since 2005) and SummaCut-R (since 2007).

With the latex 360 you have much more scratch resistance and chemical resistance than with an eco-Solvent printer. Because of much better results on textile banner and lots of different papers (wallpaper too) the machine will fit to your plans for wall coverings and prints on fabric better than...

Thrive should have an option for Roland CJ/SJ-Cropmarks.

Whe have tested Fujifilm Uvijet Z680 Adhesion Promoter on aluminium, and this will increase the scratch resistance very much.

You can do it in Flexi and in Onyx. In Flexi both in the RIP and with the Option "Contour Cutting without RIP" to set registration marks in the editor itself to send the data to VersaWorks and doing contour cutting out of Flexi. But you will not be happy with it. Because of the curing heat...

You need separate profiles for any dither type.

Because of the very high scratch resistance on banner, the motorized roll feed, the automatic control of the feed rate and the possibility to print double sided, I would check a latex 360.

You can't select Passes on the FB, you need to select a higher print mode. About heat: how old are the lamps? You know that when they reduce UV-power, you could switch them from low to high power to compensate that reduction for another few hundred hours? Heat problem could also be a problem of...

Vertical Banding on that machines could have a lot of reasons, mechanical and others. There could be dirt on carriage wheels, carriage rail or linear encoder, damages or wrong calibration of carriage motor or carriage drive belt, problems with the lamp shutters and much more. There is a...

Try to reduce ink limit in the profile.

You're right. In this case, there is just only the old fashioned user interface design :rolleyes:

I have found nothing about that special feature. But it is easy to use.

When buying a latex 310 or 330, you will get a RIP included too ... the SAi FlexiPRINT HP Edition. This is an OEM of the PhotoPRINT SE Low Cost RIP, but with Panelling- and Nesting-Option included. Although PhotoPRINT SE is a low end RIP regarding to other SAi-Products too, you will find a lot...

Davo: Do you own a Latex 360? Only with a 360 ICC-Profiling in the machine is possible. With a 310 or 330, ink limit and linearisation only can be done (an ICC-Profile must be chosen from one downloaded or generic). If you have a 360 and having no access to the ICC-Profiling, I would clone the...