Search results

We put ours in a spot where we had a 30 amp 220 line already in place. It's actually 280v on the meter so we didnt need a transformer. We just split that into 2 lines at the box and it's working just fine. So in total we're drawing less than 30 amps across both 220v outlets the machine uses I...

We sell complete stands with high res graphics, ready to hand to your customer, to the trade for well under $100. In fact, we're less than 4over, better quality, and you can actually get us on the phone, to boot.

I have a 3" CEL from hartlauer bits. It was crazy spendy but works great and I only use it for foam work.

I do these vintage racers for a friend. Commercial templates just don't exist. I use transfer tape on the sled, mark it with a sharpie, then move the tape to the wall. Put a horiz and vert reference dimension on it, take a photo, then draw it out. If it's critical, plot a paper pattern and test...

We either print and apply, then rout em out or flatbed print then rout em out. Depending on workflow volume and what's on em.

Attached are the photos of the banner stand. A zippered carrying case is included. Graphic size is 79 x 31.3 and there needs to be 1" additional at the bottom and 1" additional at the top. Rick McDonough rick@typestries.com Wholesale digital flatbed & roll to roll printing, contour...

How green is your large/grand format printer? Totals in for 6 months of scrap recycling: 192 cubic yards of plastic kept from the landfill (almost 7 full garbage trucks), $3800 in disposal costs saved, $82 check in the mail from the recycler. Here's what we recycled: • Acrylic and...

Hey Rick Did you get the machine moved up and running yet?

Hi Folks! With the addition of our new high resolution (1400 dpi) print capabilities we're adding new products. We're now offering a complete banner stand solution-including the aluminum retractable banner stand, a high resolution print 33" x 78" (that looks amazing) on premium ultra...

good direction to go. or a loose/leaky manifold on top of the head.

hey there, we have a 1224. pretty similar. Need more info. Did it start suddenly? Does your vac pump click a lot, like every few seconds? how many heads is it? if more than one head is it contained to one reservoir or more than one? is it just on one side of the vac or both? Do you have ink in...

Can you print the job on coroplast or PVC and attach that to the wall mechanically? A low cost substrate could save you a ton of install headaches

^^Good tip Mike, but what a PITA if that's the fix! I'm running mine on flexiprint 10. just this week we discussed switching to onyx since all of our other machines are onyx, you just made my mind up, hopefully they work out the kinks. I can say pretty certainly it's the RIP not the printer...

Hi folks! I just renewed my merchant subscription, and am looking forward to offering wholesale roll to roll and flatbed print services as well as flatbed computerized cutting/routing services to S101 members in 2011. If you don't have a printer router, or cutter, or have equipment but are...

well, they dropped triangle ink under one code, added a new code for it and guess what the new code is $39 more. Same stuff! Called, and was told "that's the way it is" I'm not kidding. Love it. I'm done. I was sick of all of the bad chips, anyway.

As a wholesale printer, we charge for what we print, not for what we don't. Since it's general, no price posted here, but anyone that needs pricing can email or pm me. If you send us a 3'x8' print, and we print it on 54" media, you still get charged for a 3 x 8. What we do with the drop is our...

Hey Folks......a word of caution. If you run a roll of banner material to the end, and the banner detaches from the roll with the tape that holds it to the roll......it will stick to the inside of the machine! I got lucky, and was able to slide a piece of .020 poly under the banner from the...

I'm super happy with mine.....and so are my customers! Tons of compliments on the image quality. Image quality is amazing, and operation is super easy. Only issue we have had has been printing super smooth blockout. Any suggestions?

It's not BS. I have seen the print samples here in my shop and a vid of the machine running here on the East Coast. A member here is getting one that's specific to the corrugated printing industry built by Sun and Kodak. The print quality is amazing at 500 FPM across a sheet's width. Yes 500...

that's really a PE hull? Some triumphs are fiberglass, be careful!