Search results

Bonjour de Montréal :)

Bonjour de Montréal, 'Merlin' :)

Bonjour de Montréal, Chuck! :)

DPMmx - this link to SignTools3 set up of the PNC-1000 may help out; shows how to configure the plotter ... I couldn't remember at first but this rings a bell :) ...[EXPAND-X] http://www.asigns.com/signtools/Support/Roland/PNC-1000.htm

Arlo - I sold my 1987 model Roland CAMM1 PNC-1000 on eBay this past February and received 360.00 for it plus 75.00 for shipping. I had a reserve bid of 300.00. Note: all prices in US dollars. Sure was sad to see it go as it had been a very reliable machine over all those years, but since getting...

Bonjour de Montréal, John! ... c'est bon ici :)

Kevin - I gave my SP-300 one full turn "out" and it seems to be cutting both laminate and vinyl just fine now :)

Hey, DOS CadLINK!... that's what I used for quite some time and it worked great with Corel 1 and CadLINK 1.02 (if I correctly recall the sticker on it's dongle!) Did a whole lot of 22" x 23 ft decals and paint masks (airline name on jet aircraft) that paneled perfectly ...well, as long as I...

'ozzieflyer' - g'day mate! ... note you have a Roland GX-24 and Corel 9; I have used a similar combination for quite sometime on my old CAMM1 PNC-1000 before I sold it :( Just to see how it would work, I went to the Roland site, downloaded and installed the GX-24 Win XP drivers and set it up in...

Barry - this may be a bit off the exact topic, but it is related if media contamination is the issue here (sounds like it, as you say) I notice that my supplier has the Oracal 3651 and 3951 available in reverse-wound. In your experience, have you found that this is a worthwhile choice when...

Bonjour de Montréal, Big G! :)

Bonjour de Montrtéal, Bob :) ... will keep you in mind for such work :)

'timfse' - what quality are you printing at? Standard or High? I have had similar issues at 'Standard' that all went away at 'High'; what Barry says is right on too. Also, did you do an 'Environment Match' and / or a recent 'Medium' head cleaning? Last night I was pulling my hair out (not much...

Bonjour de Montréal, 'Juneyer' :) ...have been through your neck of the woods a few times on the I-44 on my drives from Quebec City/Montreal, Quebec to Phoenix, AZ ...also St. Louis, 'Pro-motion'...coffee time at the Coffee Cartel on Maryland & Euclid :)

Actually, our refinishing technicians preferred the narrower panels as they were easier for them to handle on the scaffolding and went on quite quickly. Now I have never used the pounce pattern method but am I to gather that the hand cutting was done on the aircraft itself? The "our" in the...

SAS - I beieve that Fred has mentioned something along this line in his previous posts in this thread and I'll reiterate: where is the dealer? Here in Montreal, I have 2 Roland dealers, on the same street, 3 blocks apart! :) Made my decision quite easy :)

Cadmn :) ... as great as the Roland's are, the attached is an example of where the 'Goober' sprocket-feed is really a life (and frustration) saver! The white 'goose' on the tail of the F-28 MK 1000 is 16.5 ft high and was 16 panels worth of paint mask!!! 2 per airplane, 56 airplanes! Sure...

Arlo - great to hear that you have your Roland working! :) A great machine! I was sad to see mine leave after 19 years of totally problem-free operation. The only things that were ever changed were the blades and the teflon strip. For the year and a half that I worked with the Edge system, that...

"LtHW' - thanks! ... forgot all about that zoom 1-shot! :) ...just 'hooked it back up' and it works slick ...just like in Vr 9. However, I am still quite intrigued by the nudge-causing-A.R.M. issue. I checked my build # and it's the same as the one 'Bobby H' uses. Really don't want to open this...

Bonjour de Montréal :) ... my mother and grandmother are from the Alexandria/Parkers Prairie area :)