Search results

easiest way is to convert the fract to decimal and then multiply the decimal by the number 1/5 = 0.20 * 100 = 20 4/15 = 0.26666 * 100 = 26.67

For what you have listed to be done on the table you will need a wider surface. get the tempered glass, we use PVC on our cutting tables saves blades and dont have to worry about it being broken

when we started we had several tries to get us to do this...........now they dont ask and pay like everyone else

Each person needs their own PC, there is nothing worse than waiting on a machine to open up so you can work. running rip/design on the same machine is a bad idea as it is the bottle neck and if that machine goes down you have no other option

its a scam, like i45 said wait for the charge back. out of curiosity did the information match on the two cards? name, billing address, etc... and did you get a photo of the card are just the information? a good rule of thumb is if it sounds fishy have them take a photo front/back of the card...

That's what I found also, which makes no sense why the phone is reduced when sent to the US

there is an article in Sign Builder about this, in the most recent one

Same here, Hiker press and grommets the adjustable head height is a life saver and keeps the material looking professional and not crushed. We started aout with an el cheapo press the grommets would not seal correctly and would fall out after a while.

we have the VS model and ours work GREAT!!! same machine but has the print/cut you wont be disappointed!

You have a quad core? what carrier? From what I found they reduced it to a dual core when it came to the US, to the OP, currently running latest Droid on Nexus Prime GREAT SCREEN and speed. Never been a fan of iPhones,

This also remember the more ink you lay the longer it will take for the print to dry...

Welcome @Gino just curious if you have a dedicated drive for all the images you instantly have or a blazing fast connection and a knack for knowing exactly where to look

have you tried watching to youtube videos? is your table FLAT? how much of an angle are you holding the squeegee at? do not want much angle

Check your firmware and make sure it the latest version, when our VS 640s act up with prints 9/10 its a firmware issue

what is the $$ for this? running VS-640 latest VW

2 sheets of 3mm ACP make a frame out of aluminum or metal square tubing, the signs mounted on each side

we run a Drytac, does what we need

we get them daily, EDIT: just got an "order" for 80,000 posters 11x17 and the "image" was 23kb picture, they wanted us to pay their shipping company for freight and then run their CC for the entire amount owed depends on the mood I'm in but replies range from we only accept payment from new...

with you focusing on signs, flat surface, why not get a flat bed? also the Mimaki and Roland you have listed are print/cut, if you are getting a stand alone plotter why the print/cut function we have been happy with our VS -640, they do all we ask of them.

was thinking the same, why go to the trouble of form letters and NOT have it easy to read BTW thanks for the heads up on the the drill